Big progress this weekend. My buddy from IN has been a big help...not to mention we are having a blast.
I need some help from someone with a Dakar. Please grab an inside caliper or other measuring device of your choice and provide a measurement from the inside of the fork leg to the top most end of the rim on both sides and tell me what the differences are..if any.
I have butchered my OEM axle to mock up the front end for other measuring so I can't clamp the wheel into the forks tightly to confirm this dimension. This is the final cross check to be sure we have it ready to go.
We have a 3D model built and will be ready to start thinking about a prototype later this week.
Now I will wait to hear from one of the interested parties on that dimension and try post some pictures.