New to me '99 DR350SE. When I first looked at it, I thought that the tail light was re-located. On closer inspection, it looks like the rear subframe is bent.
I think I can bend the subframe back, if not then the subframe is listed for $87-100 on the online Suzuki dealers. It looks like it needs a carb clean out and a battery (been sitting), other than that it looks to be in good condition and all stock. I'll be taking it apart to check the valves, clean the carb, and inspect everything. I'll probaby do the T-Vent mod also. I was wondering if there is anything that is known to break or fail early on these, or anything special to look into while I take it apart?