Originally Posted by ag_streak
Oh yeah, all aluminum to keep under my weight targets. My only concern is the pivot points, swingarm and hitch. They may need bushings to prevent force and vibration from enlarging the holes.
I'm using these...
The tow pivot has a M10 thread up the middle and fixes through your hollow rear axle with spacers to centre it.
The “C” shaped parts are welded in the end of a “U” tube which forms part of the tow bracket around the rear wheel.
The trailer is then simply offered up to and over the tow pins and the collets pushed on and pinned to attach the trailer to the bike J - and no – it won’t pull off!!
EwokGB screwed with this post 04-01-2009 at 04:29 PM