ADVrider - View Single Post

God of Speed · 04-26-2009, 01:09 AM

wow joel that xr suspension is really tall, unless you are really short

.....dont think so.

i was thinking of doing a similar thing with mine but after seeing that height im not sure. i like the height of the xl. but sometimes the ride is a bit harsh, also theres alot of squeaks coming from the rear shock and swing arm that unlimited amounts of wd40 dont seem to be able to cure. but the fork seals that i installed havent leaked at all in nearly 15k kms. remarkable considering that even though i asked plenty of questions and advrider and had the workshop manual i followed NONE of the advice given and did it in the way that the manual SPECIFICALLY said not to do......go figure.

whats going on with your valve timing?

04-26-2009, 01:09 AM	#129
God of Speed Lost when found.......... Joined: Jul 2008 Location: Naughty Chair Oddometer: 1,058	wow joel that xr suspension is really tall, unless you are really short .....dont think so. i was thinking of doing a similar thing with mine but after seeing that height im not sure. i like the height of the xl. but sometimes the ride is a bit harsh, also theres alot of squeaks coming from the rear shock and swing arm that unlimited amounts of wd40 dont seem to be able to cure. but the fork seals that i installed havent leaked at all in nearly 15k kms. remarkable considering that even though i asked plenty of questions and advrider and had the workshop manual i followed NONE of the advice given and did it in the way that the manual SPECIFICALLY said not to do......go figure. whats going on with your valve timing? __________________ - Charlie 125cc Salt Racer - God of Speed Thread 'Overall happiness is directly proportional to the increasing distance between the front wheel and the ground.' - '85 XL600R-L-M-PDGSAZ God of Speed screwed with this post 04-26-2009 at 04:04 AM