Did a little more testing.
- Ignition switch is definitely fine. The red wire going in is reading 12V, and when the switch is turned on, both the Orange and Green connections are reading 12V.
- The 6-Wire male connection block with primarily orange wires that goes to the Kill Switch/Start button assembly has one wire reading 12V. However, neither of the two orange wires that come out on the other end are carrying any voltage. I wonder if the connection block thingy is bad.... ? That would certainly explain it... I think?
HeReTiK screwed with this post 05-28-2009 at 08:58 AM