950 Adv: which aftermarket bashplate, and why?

BlackDog, I prefer the finish on the plate. They are also quick to deliver.

Thank you. It's nice to have perspective from different opinions.

That bash plate is still kicking! Best 400 spent!

Hi, I ordered it directly from Adventure Spec online:

http://www.adventure-spec.com/

This is the second time I have ordered stuff from them and the service has been good both times. I'm not affiliated with them, just a satisfied customer.

+1

<a href="http://www.flickr.com/photos/53718601@N03/6832440384/" title="Untitled by seppami72, on Flickr"><img src="http://farm8.staticflickr.com/7198/6832440384_c96d13d61f_b.jpg" width="1024" height="681" alt=""></a>

"ziocello" made ... aluminum 5 mm ... indestructible ...

Custom CF/kevlar rallye styled part. Protects the bottom of the tanks in offs, keeps crap of the low header and most importantly off my boots... Yes I am associated with the manufacturer

The Weld86 plates are very good, but they are bendable.

I'd like to see some video of you bending it, please

How about a pic? It's not me in the picture, because I'm the one taking the pic, but I had just traveled the same line. The condition of this trail was similar to the pic for what seemed like a couple of miles. The pic is of us coming down; I beat the snot out of the bottom of my bike relentlessly going up and coming down. I guess that's what I get for being a fat bastard!

And please don't get me wrong, I think the Weld86 plate is a great piece of equipment. I will definitely buy another one without hesitation.




Edit for additional info: I didn't realize until months later that I had bent the plate. I didn't notice the plate springing when I removed it for maintenance, but when I tried to put it back on, the holes didn't line up. I contacted Charlie and he told me to send it back to him and he would fix it, but I figured out how to do it myself. Amazing what you can do with a pipe wrench! Anyway, please hear me when I say that the plate suffered from user abuse, not faulty equipment!!!!!

Thats right Any plate will bend, although this was not a weld plate.. Thats what they are there for.. Rather bend or break a plate then the alliterative.

Just got my Weld 86 raw aluminum plate in the mail. It is a stout piece of gear that is beautifully built.I can't wait to test it out. Great fabmanship Charlie!

Another plug for the Weld 86 Plate. Mine just arrived and I have to say the craftsmanship that went into this plate is amazing.

The welds are something that Charlie must smile as each one leaves his hands and off to a customer who will proudly beat the tar out of.

Very fast to ship and flawless quality.

Seems like y'all could get to Starbucks just fine with the stock one lol. Seriously I've been beating my bike up for a few years now with the stocker and its held up just fine. I don't see the need to drop a few hundred bucks on an aftermarket one just yet.

Another local club member who, I assure you , was not on the way to starbucks.

Y'all.

Agreed about the Weld. I had to choose between the two,(weld and BDCW) and I almost didn't buy the Weld-seemed "home-brewed" on the website. But I took a chance and it arrived during a product shoot for another client of mine.

So I played a bit with it. Very nice.

I vvent vvith the touratech. Not total useless as some of there parts tend to be. VVas happy vvith it but my gravelblaster needed some blood, svveat and tears...and CF and kevlar. I vvent toura-locul






CF/kevlar clearly shovvs. Blood, svveat and tears came from a part in this picture.



Even used some of it for the bastard aka 530´s bashplate. Protected me, novv it take care of the bikes.



VVhen i can copy paste parts like this, everyone can. Just do it....

Which bash plate do you have to have to be in "THE CLUB"?

yeah me too!!!!!

Just our local riding club...