Rally part for 990 ADV

Hi,

I am considering some trasformation for my 990.

Can any one tell me where and how I can find/buy/built the Rally tail and klever sump guard as in Meoni's bike:





Ciao&grazie

Nic

Those are actually fuel tanks, and likely custom made. Here's more info and pictures of the bike:

http://www.ktm950.info/how/Orange Garage/Meoni Bike/Fully Dressed/meoni_dakar_rally_winner_950.html

If you want those tanks then Pete640 is your man.

Hi,

No tanks but only the tail light is what I am after.

Ciao

Nic

2 Honda xr 650r lights is what you want

Looks like my first attempt at giving the link below didn't work. Let me try again:

Here's an example of how to search for threads that can help you out. Pete640 has duplicated those tanks, and they look awesome: http://www.lmgtfy.com/?q=site:advrider.com+"orange+crush"+rally+tank

Also, I know that Flanny at one point had a pair of the official Rallye lights. You see them in this video: http://www.youtube.com/watch?v=6pi4htJNSO4

I can't tell on Meonis bike, but on the one shown just above (and on my rally 660 which was ridden in Dakar), they come with 2 independant tail lights made by Acerbis. The two tail lights is a requirement of the ASO for the rally for safety, so I suspect it is what was on Meonis bike as well. They are available just about anywhere.

As Brad said, those two lights on top are used on most rally bikes and are made by Acerbis, they cost about €20 a piece.

The fender looks like a custom piece, but you could try to adapt one from an older 640 Adventure, they look pretty similar.

Now if you are only talking about the numberplate holder it is off a 90's EXC that was used on 660 and 690 Rallys as well as the 950 Rally. I put one on my 950 about 5yrs ago with little modification. Looks just right. Posted pics later but no one was interested. They are not hard to get still I think.