Yup. Big honkin bling ring. Iron Pyrite (fools gold) crystal matrix with a vug ( hole shaped void) Just big enough to mount a 6mm round brillant blue Topaz ( a December Birth Stone). Sorry for the poor pics. The crystals scatter the light.
Cherry Chest I made years ago when I was into woodworking more. It's up at my shop getting touched up from the damn puppy. Not lined but I may do that someday. I cut the dovetails by hand. A couple of brass and rosewood squares I made about the same time. Took the design from Bridge City tools.
That's what I was thinking. The ability to paint consistent thickness lines parallel to another edge? That just screams ability to pinstripe. I don't think most people recognize what a rare skill that is.
<iframe width="560" height="315" src="http://www.youtube.com/embed/xm8T7vHqOjI" frameborder="0" allowfullscreen></iframe>
After building a trail system you need to build a trail head/pavilion right? Well after pulling a lot of very old lumber out of a building to reuse I designed a basic structure and assembly commenced. Looking good at this point but it needed a roof. Rafters and stringers attached. It was built backwards, but that wasn't a big deal as I just moved it around and back to it's resting spot with the skidsteer. Then I bought some galvanized roofing panels, built a floor and it was done. It looks a whole lot smaller when you see it in the back corner of the field. Next Spring I will get a map installed in it and maybe run power to it for event use.
a harley painting (also an Impala) from Edgar Marques http://www.olemiarte.com/usuarios/edgardmarquez/gallery/my-galleries/sobre-el-muro
. I built this tonight...a mounting system for my AUX fuel cell using a Touratech rack with lockable base. http://www.advrider.com/forums/showpost.php?p=20227994&postcount=169 http://www.advrider.com/forums/showpost.php?p=20229938&postcount=170 .
Just a few random questions . Are you gonna TIG weld it or just bolt it, and are you gonna through some rubber bushing material between the frame and the tank? before you go farther what about dropping that notch into that so it drops that lower bubble, then its even lower?