ADVrider

Go Back   ADVrider > Gear > Vendors
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 07-08-2009, 06:22 PM   #1
PABiker OP
Anywhere but here
 
Joined: Dec 2006
Location: Pittsburgh
Oddometer: 3,734
My Version of the Kickstand Relocator

This is a completely bolt-on bracket to relocate the kickstand from the engine to the frame behind the left footpeg. The bracket is made from 0.250" cold rolled steel and powder coated black.

Fits all years of 9X0 Adventure and 950 SE models.

No longer will you have to worry about cracking the engine from a hit to the kickstand, or mounting the bike while fully loaded by stepping on the left peg.


Here are some pictures of the bracket:







[/SIZE][/FONT]


Here are some pictures of the bracket installed on my personal '06 950 ADV:









Here are all the details of the entire build:


A few months back I started on my version of a kickstand relocation bracket for the 950. I started by copying a design I saw another inmate here made.

Rev 1.
Flat template made out of card stock:

Bent into shape:


Mounted on the bike:



Came out OK, but since the guy I copied the design from has a Super Enduro (no centerstand), this design is going to cause an interference between the kickstand and the centerstand.

Rev 2.
Template:


Bent into shape:




Mounted:








I drew it up in AutoCAD and got it off to my metal fabricator for a prototype. Hopefully in the next few weeks I'll have a finished product for all us 9x0 owners and we'll never have to worry about cracking the engine case anymore.

Well several weeks went by (8 actually, he has a busy shop) and this is what he came up with:






He had to make it in 2 pieces because of the compound bend on the back piece, and planned on welding it together.

I test fit it onto the bike and it was not exactly right, it interferes with the centerstand retracting completely to the full up position. I marked it up, made modifications to the drawings, and stopped by the shop to show them.

He is going to cut out another piece, we also came up with a way that it can be made out of 1 piece so it will not have to be welded.

OK, so here is Rev 2 ready for a test fit:






I got it on the bike and since I can't get things right the second time, it looks like there will be a Rev 3. All in all, it fits very good, only it needs a few minor tweaks to be perfect:










Rev 3 changes will be delivered this Friday morning to the fab shop. Most notibly will be a triangulation bracket on both sides to stiffen the bend where the kickstand attaches.

Hopefully I will have the next one before I leave (going to Colorado for 2 weeks) otherwise it will have to wait.

The part seen here is 0.125 cold rolled steel but I plan to have the final version made out of the same thickness stainless. And then powder coated black. EDIT: The final product is made from cold rolled, not stainless steel.

If all goes well I should have a viable product for the market by sometime in August. I have no idea just yet what the price will be so please bear with me, since the fab shop will be basing it on time and materials.

Worst case, I have a very expensive bracket I made for myself.
__________________
'12 Suzuki DR650SE
'10 Husaberg FE450 Plated

PABiker screwed with this post 04-16-2014 at 02:43 PM
PABiker is offline   Reply With Quote
Old 07-08-2009, 07:13 PM   #2
MJS
Beastly Adventurer
 
MJS's Avatar
 
Joined: Dec 2005
Location: Ventura, CA
Oddometer: 1,772
Nicely done!

How stiff is it. I would think that .125 might be not be stiff enough for the vertical. That's a long lever. I used .250 and it still has a little flex.

The bottom "arm" is being stressed upward in the vertical direction and the vertical arm will resist that force. I always try to think about where the stress are trying to bend the bracket and what resists that force.

As I looked at it, the forces on the kick stand are trying to bend the bracket where it mounts to the left side center stand bumper bracket. That is resisted by the vertical leg being in compression. The kickstand is also trying to bend the bracket inward at the bend where the bottom horizontal is bent to be the vertical leg. That force is resisted by the stiffness (directly related to the thickness) of the bracket itself. This could also be resisted by bending an "L" in the vertical leg. That effectively increases the stiffness of the bracket.

This is a very basic description and there are actually a lot of different forces at work. I'm sure an engineer could calculate it out, but that's not me.

Cheers,
__________________
"You can follow me, but it's gonna hurt"
MJS is offline   Reply With Quote
Old 07-08-2009, 07:25 PM   #3
a1fa
Riding Nomad™
 
a1fa's Avatar
 
Joined: Nov 2006
Location: Arkansas
Oddometer: 13,464
That bungee is a mess waiting to happen.
__________________
Learn to ride. Ride to learn.
a1fa is offline   Reply With Quote
Old 07-08-2009, 07:33 PM   #4
PABiker OP
Anywhere but here
 
Joined: Dec 2006
Location: Pittsburgh
Oddometer: 3,734
Quote:
Originally Posted by a1fa
That bungee is a mess waiting to happen.
The bungee is just to hold the kickstand up because I don't have the springs installed. The hole for the spring post was tapped at the wrong angle.
__________________
'12 Suzuki DR650SE
'10 Husaberg FE450 Plated
PABiker is offline   Reply With Quote
Old 07-08-2009, 09:57 PM   #5
thugdog
Druid Revisionist
 
thugdog's Avatar
 
Joined: Sep 2004
Oddometer: 396
I want to have yer baby...Uh, the first available Rev.4, that is.


Sound design method. Good itterative approach. Steady progress of improvement. Please keep us informed.
__________________

....there's nothing more permanent than a temporary solution
thugdog is offline   Reply With Quote
Old 07-09-2009, 12:53 AM   #6
ktm950se
Banned
 
ktm950se's Avatar
 
Joined: Jan 2007
Location: Southern Maine
Oddometer: 1,385
Greetings PABiker,
Great work!
One area that may need attention is where the chain runs over/near the bracket. Extra clearance here will ensure chain-bounce won't cut into it.

I'm in for one too!

ktm950se
ktm950se is offline   Reply With Quote
Old 07-08-2009, 07:31 PM   #7
PABiker OP
Anywhere but here
 
Joined: Dec 2006
Location: Pittsburgh
Oddometer: 3,734
Quote:
Originally Posted by MJS
Nicely done!

How stiff is it. I would think that .125 might be not be stiff enough for the vertical. That's a long lever. I used .250 and it still has a little flex.

The bottom "arm" is being stressed upward in the vertical direction and the vertical arm will resist that force. I always try to think about where the stress are trying to bend the bracket and what resists that force.

As I looked at it, the forces on the kick stand are trying to bend the bracket where it mounts to the left side center stand bumper bracket. That is resisted by the vertical leg being in compression. The kickstand is also trying to bend the bracket inward at the bend where the bottom horizontal is bent to be the vertical leg. That force is resisted by the stiffness (directly related to the thickness) of the bracket itself. This could also be resisted by bending an "L" in the vertical leg. That effectively increases the stiffness of the bracket.

This is a very basic description and there are actually a lot of different forces at work. I'm sure an engineer could calculate it out, but that's not me.

Cheers,
There was some flex in it, which is why I am planning on adding the triangulation pieces to the sides.

I also plan to increase the thickness to 0.250 if the flex is too much.
__________________
'12 Suzuki DR650SE
'10 Husaberg FE450 Plated
PABiker is offline   Reply With Quote
Old 07-09-2009, 01:12 PM   #8
KTRMN8R
Sand Camel
 
KTRMN8R's Avatar
 
Joined: Dec 2006
Location: Sandhills, NC
Oddometer: 1,208
Eh? Question?

Hmmm,... Why did you want to relocate it,... what advantages are there??? I haven't seen the other histories so pardon my curiosities.

Thanx!,
__________________

God Bless & Godspeed!
KTRMN8R is offline   Reply With Quote
Old 07-09-2009, 03:51 PM   #9
aurel
Cheese&Wine!
 
aurel's Avatar
 
Joined: Sep 2006
Location: Toulouse, France
Oddometer: 3,687
Quote:
Originally Posted by KTRMN8R
Hmmm,... Why did you want to relocate it,... what advantages are there??? I haven't seen the other histories so pardon my curiosities.

Thanx!,
From stock the sidestand is attached to the engine case, it put some stress on it and it can damage it (cracks, oil leak).
aurel is offline   Reply With Quote
Old 07-09-2009, 07:07 PM   #10
PABiker OP
Anywhere but here
 
Joined: Dec 2006
Location: Pittsburgh
Oddometer: 3,734
Thanks guys, I do plan on seeing this through. Just not sure what the cost will be until I perfect the design.

Heading to the fab shop in the morning to discuss the next rev, and it will definitely include making it thicker.

Details to follow.
__________________
'12 Suzuki DR650SE
'10 Husaberg FE450 Plated
PABiker is offline   Reply With Quote
Old 07-10-2009, 12:22 AM   #11
aurel
Cheese&Wine!
 
aurel's Avatar
 
Joined: Sep 2006
Location: Toulouse, France
Oddometer: 3,687
Is the wire long enough from stock ?
aurel is offline   Reply With Quote
Old 07-10-2009, 04:55 AM   #12
CHRIS_D
Studly Adventurer
 
CHRIS_D's Avatar
 
Joined: Aug 2008
Location: Southside of ATL, GA
Oddometer: 818
Looking good!!! Please put me on the list also.

Aurel,

From what I can see, I don't think the sidestand wiring will be long enough.
__________________
2014 KTM 1190 Adventure R
2011 Victory Cross Country
CHRIS_D is offline   Reply With Quote
Old 07-17-2009, 12:47 AM   #13
thugdog
Druid Revisionist
 
thugdog's Avatar
 
Joined: Sep 2004
Oddometer: 396
Talking

Hey, no queue cutting!



Regardless of "who's on first," thanks again for all your efforts PAb... !!

.
__________________

....there's nothing more permanent than a temporary solution
thugdog is offline   Reply With Quote
Old 07-18-2009, 10:42 AM   #14
Tarna_Tarna
Banned
 
Tarna_Tarna's Avatar
 
Joined: Dec 2008
Location: Gryfino, Zachodniopomorskie POLAND
Oddometer: 76
Thumb

i'll buy it if it will be possible - let me know
Tarna_Tarna is offline   Reply With Quote
Old 07-24-2009, 05:35 AM   #15
Stobie
Mr. Motivated
 
Stobie's Avatar
 
Joined: Jun 2002
Location: Stanley, NC
Oddometer: 1,844
PM sent.

Nice work.
__________________
Stobie


Problems cannot be solved at the same level of awareness that created them.

-Albert Einstein
Stobie is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 01:37 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014