ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 12-07-2009, 09:23 AM   #1
Yellow Pig OP
Allergic to Asphalt!
 
Yellow Pig's Avatar
 
Joined: Oct 2004
Location: Colorado
Oddometer: 6,817
Thumb Living with a Husky TE510!

So I just got rid of my trusty, old BRP and picked up a 2010 Husky TE510.





I will chronicle my life with this new bike and let you know both the good and the bad.

The reason for the switch was that one the BRP was getting a bit tired and I was getting tired of no e-star, two, and more significantly, was that I picked up a KTM 950 SE at the beginning of the 2009 riding season. With the SE in the stable I found that it could do 80-90% of what the BRP could, so there was too much overlap between the two bikes. I found that I needed a smaller more trail worthy bike that would be more suitable for technical terrain, but still be street legal. The TE fit the bill and on top of this was EFIed so i would not have to fool around w/ jetting given the typical 6000ft/2000meter elevation changes encountered here in Colorado on an average ride.

Since I picked up the bike we have had an arctic cold front here in Colorado that has prevented me from actually riding the bike. The only thing I have been able to do is put a few breaking miles around town and de-smog/power up the bike.

Initial impressions: The husky seems very well make, with great components and a good fit and finish. Initially it seems much vibe-er than mu old XR which was butter smooth. I hoping that it gets better once the engine has had a chance to break in. The stock Brembo brakes are phenomenal. Great stopping power and feel. I love how the bike was made to run in race mode. All the additional stuff was designed to be easily removed. Even the OEM exhaust, a top of the line Arrow is a great piece of gear that will not need to be replaced w/ an aftermarket exhaust.

Now this just needs to go away so I can actually ride the thing:



More to follow...

PROS:
- I love the look of the bike
- Fit and finish seems great
- Comes w/ quality components
- Incredible brakes
- Easy to work on, seems like Husky tried to use the same size bolts as much as possible
- Easy to de-smog/power up
- Shop manual comes w/ the bike on a USB key

CONS:
- Small tank (1.9 gal), the only aftermarket tanks a 3 gal IMS which with an average off-road MPG of 40-45 miles netts a range of 120-135 miles.
- So far the bike is a bit vibe-er that the BRP, but that could get better once the bike is broken in.
- Exhaust is extremely hot where it enters the muffler. Needs to be wrapped w/ header wrap to keep from burning pants and melting air-box.
- Gear shifter lever is ridiculously short (1.5 inches shorter than you average one)
- Foot-pegs are small and look like they are a cheap cast material prone to shattering
- OEM Arrow exhaust is way too loud for trail riding
- OEM radiators are very exposed and vulnerable. Not factory protection what so ever.

Planned Up-Grades:

- Uptite skid plate
- Cycra Handguards
- Heated Grips
- Pro Grip Rally grips
- IMS 3 gallon Tank
- Motosportz rear disk guard
- Zip Ty Gear shifter lever
- Zip Ty case saver
- Fastway foot pegs
- Taller gearing (will start w/ 14/47 or 15/47. Stock is 13/47)
- TE610 rear rack subframe
- PMB rear rack
- OFG racing radiator guards
- Husky dB killer insert
- Power Commander w/ Autotune

Initial Set Up:

The Husky comes from the factory w/ ever thing you need to get it running right. The so called Husky power-up kit comes with a plug for the O2 mid pipe sensor (remember the bike has EFI), a resistor plug for the EFI that switches the mapping to race mode, a free flowing air filter basket, and a removable catalytic converter situated in the mid pipe.


Husky Power-Up:

1- Remove air filter restrict or and replace w/ open basket.

This is what the Husky comes w/ from the factory. It's amazing the bike is even able to run w/ such low air flow. This must be how they manage to be 50 state street legal, pass CARB and Euro-3 restrictions.








So you get rid of that nonsense and put this in:



Ahhh! Much better!


I opted to keep the flash-back screen in the air-box for now. I need to see how the bike runs first.



2- Remove the exhaust end piece and slide out the cat converter:



This is where it sits in the mid pipe:



3- The Husky had this strange octopus attacking it so I whacked it off w/ a hammer and threw it away:



Gotta make sure you plug this thingy up (yes that is a technical term):






4- Take out the O2 sensor and plug the hole:





5- Once the O2 sensor is taken care of the spot where it was plugged into the EFI system needs to be taken car of. Husky provides this nifty plug w/ a built in resistor that tells the system the O2 sensor is no longer there and to get on w/ race mode.


WARNING: George from Up Tite Racing just told me that the moment you plug the race mode adaptor into the bike and turn it on it puts a code in the ECU which void your warranty!!!!

I wish my dealer had mentioned it or it was written in the manual. After all the bike comes from the factory w/ all these upgrade components.

Oh well, gotta pay to play.



Thats it now you are ready to roll.



I did a initial oil change at 35 miles. The oil looked pretty rough for such short mileage and there were a few metal flakes in the oil screens, plus a chunk of head gasket came out of the oil pan.

Oil changes are super easy:

- Remove drain plug
- Clean magnetic drain plug
- Remove 2 screws that hold oil screen #1 on left side of bike
- Remove Allen head plug that hold oil screen #2 on left side of bike
- Remove oil filter on right side of bike
- Close all holes
- Add oil (1700 ml for oil & filter change) and go
__________________
So Many Idiots, So Few Comets!!!!!!!!!

Yellow Pig screwed with this post 01-08-2010 at 08:00 PM
Yellow Pig is offline   Reply With Quote
Old 12-07-2009, 11:09 AM   #2
bobfab
Beastly Adventurer
 
bobfab's Avatar
 
Joined: May 2009
Location: Westminster CO
Oddometer: 1,227
very jealous. Love the new huskys, keep us posted
__________________
Project Labor of Love: 1972 CT90 Rebuild
Current Stable: VFR800 | CRF250L | KTM200SX
bobfab is offline   Reply With Quote
Old 12-07-2009, 11:34 AM   #3
moto_loco
poser extraordinaire
 
moto_loco's Avatar
 
Joined: Nov 2009
Oddometer: 105
Great write up on your new Husky 510. They look ready to pounce...
just like that sweet BRP you have.

I learned a few things I would have never known otherwise. Thanks for taking time to post it.
moto_loco is offline   Reply With Quote
Old 12-07-2009, 01:28 PM   #4
Ruffus
Dirty Old Mudder
 
Ruffus's Avatar
 
Joined: Jan 2006
Location: Fort Erie,Ontario
Oddometer: 4,040
I didn't see the Uptite "Y" fitting, it's a good idea to have, more even cooling between the rads & can't melt (never heard of one melting BTW)
If you haven't read it already, here's a great link for 510's secrets.

SCOTT SUMMERS: ME & MY HUSKY | News | Dirt Bike Magazine

P.S. congrats on getting the "Wolf"



P.S.S. A great Husky community with friendly people & loads of Husky experience can be found here

Cafe Husky
__________________
We spend our lives chipping away at our ignorance :wisdom by Dakez

Friendship is like peeing your pants, everyone can see it, but only you
can feel the true warmth.: wisdom by ??



Reverse Darwinism...he's only alive because he's to stupid to die. : wisdom by AZRamjet

06 Husky TE510

Ruffus screwed with this post 12-07-2009 at 01:34 PM
Ruffus is offline   Reply With Quote
Old 12-07-2009, 01:38 PM   #5
AZ TOM
Beastly Adventurer
 
Joined: Oct 2008
Location: Prescott AZ
Oddometer: 3,452
Owned a few including 06 TE 510 & 07 TE250. Bottom line if the 650 R had an E-start there would be no better bike on the planet!!
AZ TOM is offline   Reply With Quote
Old 01-08-2010, 08:34 PM   #6
lukachuki
Gnarly Adventurer
 
lukachuki's Avatar
 
Joined: Jun 2008
Location: Aiken, SC
Oddometer: 108
Quote:
Originally Posted by AZ TOM
Owned a few including 06 TE 510 & 07 TE250. Bottom line if the 650 R had an E-start there would be no better bike on the planet!!
I would agree, but I would through in a 6 speed tranny.
lukachuki is offline   Reply With Quote
Old 12-07-2009, 02:08 PM   #7
Yellow Pig OP
Allergic to Asphalt!
 
Yellow Pig's Avatar
 
Joined: Oct 2004
Location: Colorado
Oddometer: 6,817
Quote:
Originally Posted by Ruffus
I didn't see the Uptite "Y" fitting,
No need for it the 2010 Husky has several imporvements:

- Kayaba vs Marzocchi
- 15mm shorter swing arm
- Frame reinforced at critical points
- New more flexible IPD Graphics and plastics
- Rear LED tail light
- New more powerful headlight
- New high flow water pump
- Last but not least a factory Y fitting




I beleive there is a factory TSB that allows you to retrofit the upgraded pluming to certain model years.

PS I'm danbartol on Cafe Husky & danbart on Husky Talk and TT!
__________________
So Many Idiots, So Few Comets!!!!!!!!!

Yellow Pig screwed with this post 12-07-2009 at 02:23 PM
Yellow Pig is offline   Reply With Quote
Old 12-07-2009, 05:00 PM   #8
Ruffus
Dirty Old Mudder
 
Ruffus's Avatar
 
Joined: Jan 2006
Location: Fort Erie,Ontario
Oddometer: 4,040
Sweet

Welcome to the club
__________________
We spend our lives chipping away at our ignorance :wisdom by Dakez

Friendship is like peeing your pants, everyone can see it, but only you
can feel the true warmth.: wisdom by ??



Reverse Darwinism...he's only alive because he's to stupid to die. : wisdom by AZRamjet

06 Husky TE510
Ruffus is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 06:04 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014