ADVrider

Go Back   ADVrider > Gear > The Garage
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 11-14-2012, 07:28 PM   #1
espacef1fan OP
Studly Adventurer
 
Joined: Nov 2007
Location: Clarksville, TN
Oddometer: 631
Static Tire Balancer--Is this one any good?

http://www.cyclegear.com/eng/product...and/web1010635

Im kind of done dealing with dealers and shops. This balancer would pay for itself the first tire change with the rapings they charge you for in the Nashville area...
__________________
1998 TL1000R
2006 Ninja 650R
Want a dual sport again...accepting donations..lol
espacef1fan is offline   Reply With Quote
Old 11-14-2012, 07:42 PM   #2
bhorocks
Gnarly Adventurer
 
bhorocks's Avatar
 
Joined: Jun 2008
Location: Phoenix az
Oddometer: 338
save your money if you dont care for the truing stand.. I use the harbor frieght one and it works just fine..

http://www.harborfreight.com/motorcy...and-98488.html
bhorocks is offline   Reply With Quote
Old 11-17-2012, 06:11 AM   #3
Jamming
Desert RAT
 
Jamming's Avatar
 
Joined: Sep 2005
Location: Buckeye AZ.
Oddometer: 2,788
Quote:
Originally Posted by bhorocks View Post
save your money if you dont care for the truing stand.. I use the harbor frieght one and it works just fine..

http://www.harborfreight.com/motorcy...and-98488.html
I use one, works great! Works better if you use bearings off a skateboard wheel.
__________________
My Native American name is "plays in traffic"
Triumph 1050 Tiger
WWW.Motorcyclistcafe.com
Jamming is offline   Reply With Quote
Old 12-07-2012, 10:02 AM   #4
Smoke Eater 3
Gnarly Adventurer
 
Joined: Nov 2012
Location: Lincolnville,Maine
Oddometer: 482
Quote:
Originally Posted by bhorocks View Post
save your money if you dont care for the truing stand.. I use the harbor frieght one and it works just fine..

http://www.harborfreight.com/motorcy...and-98488.html
Yep! Got that one. Dealers in my area hate me because everyone changes their tires in my garage. I welded up a receiver mount for the Harbor Freight wheel changer too. We change tires on the side of the road, at track days, etc.
Smoke Eater 3 is offline   Reply With Quote
Old 11-14-2012, 07:46 PM   #5
espacef1fan OP
Studly Adventurer
 
Joined: Nov 2007
Location: Clarksville, TN
Oddometer: 631
I just read all the reviews for that balancer, it seems all of the shafts are bent from the box...no good. I want to like the $39.99 thing..but..yeah. :/
__________________
1998 TL1000R
2006 Ninja 650R
Want a dual sport again...accepting donations..lol
espacef1fan is offline   Reply With Quote
Old 11-18-2012, 07:47 PM   #6
racer1735
Gnarly Adventurer
 
Joined: Dec 2005
Location: Amarillo/Canyon, TX
Oddometer: 331
Quote:
Originally Posted by espacef1fan View Post
I just read all the reviews for that balancer, it seems all of the shafts are bent from the box...no good. I want to like the $39.99 thing..but..yeah. :/
Not all the shafts are bent. I can attest to that. Genreally the bent ones are the few that speak up about them (that thing about the 'greasy wheel', you know?) You may have to true up the uprights, but that is easy. And the bearings work exceptionally smoothly.
racer1735 is offline   Reply With Quote
Old 11-14-2012, 08:08 PM   #7
clapped_r6
The Spoad Warrior
 
clapped_r6's Avatar
 
Joined: Jan 2006
Location: Ridgefield, WA
Oddometer: 2,584
"marc parnes" balancer

sometimes they pop up used
__________________
colonel angus sez, "sometimes you just gotta superman that ho"
clapped_r6 is online now   Reply With Quote
Old 11-14-2012, 08:35 PM   #8
espacef1fan OP
Studly Adventurer
 
Joined: Nov 2007
Location: Clarksville, TN
Oddometer: 631
Quote:
Originally Posted by clapped_r6 View Post
"marc parnes" balancer

sometimes they pop up used
I like it...but how important is it to get the shaft perfectly level? I mean jackstands only get so close....
__________________
1998 TL1000R
2006 Ninja 650R
Want a dual sport again...accepting donations..lol
espacef1fan is offline   Reply With Quote
Old 11-15-2012, 03:16 PM   #9
Rd650
Gnarly Adventurer
 
Rd650's Avatar
 
Joined: Aug 2009
Location: Clemson SC
Oddometer: 198
+1 on the HF trueing stand. Worth $40 for sure.
Rd650 is offline   Reply With Quote
Old 11-15-2012, 03:35 PM   #10
ibafran
villagidiot
 
Joined: Apr 2007
Location: chicagoland
Oddometer: 1,241
Do the search for balancing stands on this site. You can build yourself a 'dead on rails' balancer for about $10. It works so good that it is scary. Original article can be found some years back in Motorcycle Consumer News under DYI Motorcycle Wheel Balancer. Visit http://board.mcnews.com/ and look at the article index till you find it. Annoys me no end that the info isn't on the 'free' section of the site.
__________________
"beware the grease mud. for therein lies the skid demon."-memory from an old Honda safety pamphlet
ibafran is offline   Reply With Quote
Old 11-15-2012, 05:17 PM   #11
sailah
Lampin' it
 
sailah's Avatar
 
Joined: Aug 2005
Location: Turning expensive metal into scrap
Oddometer: 5,270
I built one very similar to this but did not want thumbscrews. So I simply made the cones "stepped" to fit my Husky and KTM wheels. I also simplified the mounts. I used 1/2" drill rod and 1/2" shielded bearings. It's very accurate. If you don't have a lathe, you'd have to have a machine shop turn up the cones. I tried it once with sealed bearings and they have too much resistance. Shielded works great.

Here's a pic I found of the dead on rails.



I drop mine down on jack stands, takes seconds to set up. Mine is pictured with the KTM cones on it which are 20 & 26mm I think. The Husky ones are setting next to it. I also made some housings for the bearings but they serve no purpose.

Total cost was maybe $20.

Here's what I used, Mcmaster catalog stinks for linking parts, but I listed the part numbers.

http://www.mcmaster.com/#catalog/118/3673/=k6iwi2

Tool steel 0.5000" 0.001" 8893K451 $5.06

1/2" ID 1 1/8" OD double shielded ball bearings 6384K61 $7.98



__________________
We're not out here to rough it. We're here to smooth it . Things are rough enough in town.

Nessmuk
sailah is offline   Reply With Quote
Old 11-15-2012, 05:33 PM   #12
ohgood
Beastly Adventurer
 
ohgood's Avatar
 
Joined: Sep 2010
Location: alabama
Oddometer: 1,963
I don't get it... what's wrong with the stock axle and two lawnchairs ?

no, really.
__________________
Donkeys are flying
ohgood is online now   Reply With Quote
Old 11-15-2012, 06:09 PM   #13
sailah
Lampin' it
 
sailah's Avatar
 
Joined: Aug 2005
Location: Turning expensive metal into scrap
Oddometer: 5,270
Quote:
Originally Posted by ohgood View Post
I don't get it... what's wrong with the stock axle and two lawnchairs ?

no, really.
The friction of the seals in the bearings is enough for it not to be accurate.

I tried mine with brand new precision sealed bearings and it was not accurate. Asking old wheel bearings to do this work not happening.

With the shielded bearings, it's much more accurate. I will let it settle, and move the wheel maybe 1-2 degrees and it will go right back to settled after clocking back and forth.

With open bearings it would be even more accurate but they are really hard to keep clean.

I notice a huge difference on the road with my dirt bike tires, especially since I am running rimlocks. My KTM has the valve core and rimlock in the same 30 degrees so it's really out of whack the Husky at least offsets them.
__________________
We're not out here to rough it. We're here to smooth it . Things are rough enough in town.

Nessmuk
sailah is offline   Reply With Quote
Old 11-28-2012, 07:00 AM   #14
buls4evr
No Marks....
 
buls4evr's Avatar
 
Joined: Sep 2009
Location: Michissippi & Nuevo Mexico
Oddometer: 2,262
Quote:
Originally Posted by ohgood View Post
I don't get it... what's wrong with the stock axle and two lawnchairs ?

no, really.
Or picnic table, chunk of 4X4 just right and stock axle.... Really cheap.
buls4evr is offline   Reply With Quote
Old 11-28-2012, 11:22 AM   #15
triplenickel
Beastly Adventurer
 
triplenickel's Avatar
 
Joined: Jul 2008
Location: Campbell River, BC. Fantasy Island
Oddometer: 2,395
Quote:
Originally Posted by buls4evr View Post
Or picnic table, chunk of 4X4 just right and stock axle.... Really cheap.
I use 1/2" round stock with a magnetic torpedo level hung from it, pretty simple. No point in over thinking this shit eh? I have my favorite tires like everyone and when chainging like for like it pretty much never changes.
__________________
07 SE

PG007
"Up there where you eat moose-cock you must all be rockets scientists."
triplenickel is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 02:41 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014