|11-26-2012, 03:00 PM||#1|
Joined: Aug 2011
Location: San Francisco, CA
Working on restoring a old bike with 6v electrics...everything is working, but I'm changing handlebars and need to replace the handlebar control switches.
Anyone have any experience with
Will they work with 6v as I assume they're made for 12v?
|11-26-2012, 07:00 PM||#2|
Joined: May 2009
Location: Newcastle, Australia
Yes, simple things like switches should* be fine. You only need to worry about more complicated things like rectifiers etc.
*I say should work because there is a slight chance that the current in a 6 v system would be to high for the 12v switches. Voltage=Current x Resistance so half the voltage means you have twice the current in any given system, you're old bike is probably putting out less watt's than a newer bike so I wouldn't worry.
Rally Raid Engineering - Carbon/Kevlar Bike Protection | Advrider thread
KTM 640 Adventure Carbon/Kevlar Tank, Frame & Case Guards - NEW 640 ADV RALLY FAIRING
KTM 690RR Fairing | KTM 690 Evo2 Tank Guards
|Thread Tools||Search this Thread|