Waterproof BMW Hall plates (HES plates)

Dan Cãta · 02-10-2013, 10:00 AM

Hi all,

Because almost all of the BMW R 850/1100/1150 bikes suffer because of a HES (Hall effect sensors) plate failure, I cam up with this design that will never fail again, meaning that you will never get stranded because of this. You can pressure wash the bike all you want or ride in the rain, after fitting this part. For GS riders, river crossing will never be a problem, unless you allow water inside the engine

The price for an unit is 220$ , shipping is included, worldwide, and the warranty for this part is the lifetime of the bike. It replaces the 12112306137 and 12117673277 OEM code parts from BMW. For the 1150 bikes, it's a direct swap. Unfortunately, for the 1100 and pre-1999 bikes, I have not been able to find the right connector for the bike's harness, so you will have to solder the wires to your failed plate connector. For this reason, the price is a little lower.

Here's a video of it working:

For purchases, please go to my webstore: http://boxer-upgrades.webs.com/apps/...s/show/3693164

Thanks,
Dan.

twinrider · 02-11-2013, 04:33 AM

Both my 1100GS and 1100RT's Hall sensors bit the dust, wish this had been around back then. Bump!

Dan Cãta · 03-04-2013, 09:22 PM

I have updated the price on these. Was 270$, now it's 220$

Dan.

02-10-2013, 10:00 AM	#1
Dan Cãta ^OP Beastly Adventurer Joined: Jun 2008 Location: Cluj, Romania Oddometer: 1,465	Waterproof BMW Hall plates (HES plates) Hi all, Because almost all of the BMW R 850/1100/1150 bikes suffer because of a HES (Hall effect sensors) plate failure, I cam up with this design that will never fail again, meaning that you will never get stranded because of this. You can pressure wash the bike all you want or ride in the rain, after fitting this part. For GS riders, river crossing will never be a problem, unless you allow water inside the engine The price for an unit is 220$ , shipping is included, worldwide, and the warranty for this part is the lifetime of the bike. It replaces the 12112306137 and 12117673277 OEM code parts from BMW. For the 1150 bikes, it's a direct swap. Unfortunately, for the 1100 and pre-1999 bikes, I have not been able to find the right connector for the bike's harness, so you will have to solder the wires to your failed plate connector. For this reason, the price is a little lower. Here's a video of it working: For purchases, please go to my webstore: http://boxer-upgrades.webs.com/apps/...s/show/3693164 Thanks, Dan. __________________ R 1100/1150 Intake(Throttle body) repair kits - Now with nstructions!!! Waterproof HES (Hall effect plates) for R 850/1100/1150 beemers boxer-upgrades/webstore Dan Cãta screwed with this post 03-04-2013 at 09:20 PM Reason: Price update: 220$ instead of 270$.

03-04-2013, 09:22 PM	#3
Dan Cãta ^OP Beastly Adventurer Joined: Jun 2008 Location: Cluj, Romania Oddometer: 1,465	I have updated the price on these. Was 270$, now it's 220$ Dan. __________________ R 1100/1150 Intake(Throttle body) repair kits - Now with nstructions!!! Waterproof HES (Hall effect plates) for R 850/1100/1150 beemers boxer-upgrades/webstore

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-11-2013, 04:33 AM	#2
twinrider pass the catnip Joined: Aug 2002 Location: Earth Oddometer: 7,575	Both my 1100GS and 1100RT's Hall sensors bit the dust, wish this had been around back then. Bump!