Help with 276C Touratech Mount

boatanchor · 02-14-2010, 08:51 AM

I just purchased a standard (Non-Locking) Touratech Mount for my 276C.

The new handlebars I just purchased for my DR650 do not have the crossmember and I am trying to find a RAM mount adapter plate that will fit the back of the Touratech mount using the four bolts that come with the Touratech unit. The old RAM mounting plate (Model No. RAM-B-202-G2U) I used on the marine cradle does not fit the new Touratech mount. Does anyone know the RAM part number that will fit the back of the Touratech mount? I looked at the drawings on the RAM web site but they did not show anything that would fit.

TIA

BA

Drif10 · 02-14-2010, 09:13 AM

This one will work, though you might have to drill a couple of holes, but there's plenty of space for that.

http://www.gpscity.com/ram-mount-uni...te-cradle.html

Steve W · 02-14-2010, 09:30 AM

A standard Ram "diamond plate" will work if you use only two bolts and position the plate on the diagonal.

boatanchor · 02-20-2010, 07:24 PM

Steve W,

Thanks for the suggestion...I had a diamond plate on the bottom of the mount for my emap and took off...low and behold it fit the Touratech mounting holes if you mounted it straight up and down...

I am good to go...

BA

02-14-2010, 08:51 AM	#1
boatanchor ^OP boat anchor Joined: Nov 2006 Location: North East of Hooterville Oddometer: 38	Help with 276C Touratech Mount I just purchased a standard (Non-Locking) Touratech Mount for my 276C. The new handlebars I just purchased for my DR650 do not have the crossmember and I am trying to find a RAM mount adapter plate that will fit the back of the Touratech mount using the four bolts that come with the Touratech unit. The old RAM mounting plate (Model No. RAM-B-202-G2U) I used on the marine cradle does not fit the new Touratech mount. Does anyone know the RAM part number that will fit the back of the Touratech mount? I looked at the drawings on the RAM web site but they did not show anything that would fit. TIA BA __________________ My journey with you has been an adventure...... "I guess it must be wanderlust or tryin to get free" BA

02-14-2010, 09:13 AM	#2
Drif10 Accredited Jackass Joined: Jun 2003 Location: Gates of Moscow Oddometer: 42,794	This one will work, though you might have to drill a couple of holes, but there's plenty of space for that. http://www.gpscity.com/ram-mount-uni...te-cradle.html __________________ Life is not measured by the number of breaths we take, but by those moments that take our breath away. George Carlin

02-14-2010, 09:30 AM	#3
Steve W Old Grouch Joined: Apr 2008 Location: Rocky Mountains of Alberta Oddometer: 541	A standard Ram "diamond plate" will work if you use only two bolts and position the plate on the diagonal. __________________ SW

02-20-2010, 07:24 PM	#4
boatanchor ^OP boat anchor Joined: Nov 2006 Location: North East of Hooterville Oddometer: 38	Thanks Steve W, Thanks for the suggestion...I had a diamond plate on the bottom of the mount for my emap and took off...low and behold it fit the Touratech mounting holes if you mounted it straight up and down... I am good to go... BA __________________ My journey with you has been an adventure...... "I guess it must be wanderlust or tryin to get free" BA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: