Go Back   ADVrider > Bikes > Old's Cool
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 11-23-2010, 06:02 AM   #11
toplessFC3Sman OP
Joined: Oct 2009
Oddometer: 68
I'll need to look into the latch, thanks for letting me know! This one requires pulling up on the tab to get the top to open, and the broken one that had been on there appeared to work the same way, and b/c of the amount of "hook" to the top piece, really requires a good shove to the top of the cap and yank on the tab to get it to open

Taller MX style bars would be good too; I had bought a set of stock bars that was supposed to be off a '72 CL350, but it had some metal sleeve welded on that half-overlapped with the clamps, so I couldn't use it. It also wasn't drilled for the wiring from the left handgrip, (but had an almost identical right grip/throttle/switch assembly to the CL) so maybe this was a piece from an SL or off-road derivative. I don't expect the tuning will be too difficult if it originally made due with a carburetor and inertial ignition advance; to start I could just load up a fake ignition table based off of the stock unit & very basic fueling. The biggest challenge will probably be just the process of datalogging, since I can't sit the computer on the passenger seat and adjust while driving.

That Caswell stuff looks like it might do the trick; I'm going to look into any places locally that could boil the tank too.
toplessFC3Sman is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 08:33 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015