|02-12-2011, 05:33 PM||#1|
Joined: Jun 2008
Location: S.E. Michigan
is there a correct "phase" for shaft to out-flange on an r80g/s?
Well, my trans is finally cleaned and re-installed.
Is there a correct orientation for the dive shaft to connect to the output flange? the driveshaft flange looks H-like, and the output flange looks X-like.
I just want to be sure.
i made a mark before disasembly, but it must have been in dirt because i cant find it now.
|02-12-2011, 05:50 PM||#3|
G(/)S ... what else!
Joined: Aug 2005
Some of the above is fact, some is fiction, some is my personal imagination and some is just simple truth. [me]
... i'm not touring around the world, but neither are most of the guys i see running overloaded spam cans ... [bmwblake]
'72 R75/5 The Blues
|Thread Tools||Search this Thread|