KTM LC8 Exhaust and Auxillary Tank

[dad2bike]

Originally Posted by crazybrit

How did this work out for you dad2bike? I posted on the above thread as I was curious if there wasn't a different approach.

I don't really like the idea of blocking the turn signals but it's not totally clear from the pics how badly blocked they are.

If anyone's done it a different way perhaps you could comment on the above thread. Thanks very much!

I ended up just doing the one side. This gives me enough room to get the cap off good.
I uses hand saw to cut the bracket from the pannier loop. I then swung it back as close as I felt good to the turn signal. Welded and cleaned up there. Only part I took off was the bracket to contour the notch. I used a grinder and fine sandpaper to clean up. Then painted all with simple Black gloss paint.



Edit: Do the job BEFORE putting the tank on. You can see the scratches I put on the aux tank with the sandpaper.