2001 TE 610 Wheel Dimensions and/or Fitment on a 2006

kpt4321 · 07-05-2011, 09:14 AM

Hi All-

I am looking for somebody with a 2001 (or same generation) Husky TE 610 who can measure rear rotor to sprocket spacing for me.

Alternatively, if anyone has run a '01 610 wheel on a 2006 (or same generation) 610, please let me know!

I need a set of wheels for my TE, and I have come across a 2001 set, but I do not know if they will fit. I know that the '01 has a cush drive and my bike doesn't, but it does have the same axle diameter... My biggest concern is the spacing between the chain and the caliper, because there isn't much I can do to take care of that. Spacers and such I can custom machine.

Thanks!!

07-05-2011, 09:14 AM	#1
kpt4321 ^OP Beastly Adventurer Joined: Jun 2008 Location: Philadelphia, PA Oddometer: 1,665	2001 TE 610 Wheel Dimensions and/or Fitment on a 2006 Hi All- I am looking for somebody with a 2001 (or same generation) Husky TE 610 who can measure rear rotor to sprocket spacing for me. Alternatively, if anyone has run a '01 610 wheel on a 2006 (or same generation) 610, please let me know! I need a set of wheels for my TE, and I have come across a 2001 set, but I do not know if they will fit. I know that the '01 has a cush drive and my bike doesn't, but it does have the same axle diameter... My biggest concern is the spacing between the chain and the caliper, because there isn't much I can do to take care of that. Spacers and such I can custom machine. Thanks!! __________________ TAT 2008 / Colorado 2010 "Both the man of science and the man of action live always at the edge of mystery, surrounded by it." -Oppenheimer 2007 Monster S2R / 2006 TE610 / 1999 KDX 200 / 2000 DRZ-E

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode