Harley XR1200

[Snapper]

I've learned to keep a back-up bike with Harley ownership.

[spenny]

Yea, I'm thinking of supermoto-ing my TE450 and getting an ATV for the trails.

[Ultra54]

The same type of issue happend with my Ducati Monster. A part failed in the shifting mechanism and it was down for a month in prime riding season. In the end after fighting with the dealer they did what they should have done in the first place and removed a part from a bike on the floor. The cranky parts man treated me like shit and didn't seam to understand my displeasure..... For the record it was Inglis Cycles in London Ontario.

When your clutch cable breaks, it takes over a week to get a new one in stock.

I wonder if there is a conversion out there for a Magura hydro system?

[ChainSaw]

Originally Posted by spenny

...Apparently the wrong cable was sent! (I'm assuming they ordered the wrong cable) And it will be another 2, that's right, 2 weeks before the right one arrives! FML

Might be a day late and a dollar short on this, maybe an aftermarket cable would be worth being cash-out-of-pocket for bike-back-on-the-road?

http://www.barnettclutches.com/produ...odel=sportster

XL1200 is listed at the very bottom.

[yellowjam]

Hi folks,
this is my XR1200SC "The Scrambler". In my opinion this is the bike lot's of people would like to get offered from the MOCO. This is one of two Harley's i own. My other one is a Dyna Glide. I like to convert my Harley's with (mostly)used other HD parts, but want to beware the "Original HD Look". So i do the same as the MOCO - take something from this and that model and: VOILA! Create a new Bike...
Before you ask, here is the parts list:
- powder coated wheels from a 2008 Street Bob
- tyres 110/80R19 & 150/70R17 Metzeler Karoo
- LSL upper plate of triple tree
- 7" Headlight Euro-Style
- Puig lamp mask
- LSL Stahlflex brakelines in front
- Hyperpro dampers front fork kit
- 16" rear shocks from HD Street Rod
- rearlight cover jp cycles
- derby cover No1
- Corbin gunfighter and lady seat
- K&N filter, remove airbox flapper (Euro Version), trick-plug in
- Nightrider OIED sensor tuning
This bike is not yet finished, stay tuned for the upgrates.

[yellowjam]

Why i ride this? The world don't need another boring GS more!!

[yellowjam]

Yes mam, it works...

[yellowjam]

1.710m Monte Baldo, Italy...

[yellowjam]

My wife likes the Scrambler too.

[Kentucky]

I love my new to me 09 Vivid Black XR1200. Sweet package. The black V and H pipes sound fabulous. I fell in love with them while announcing the Vance and Hines XR1200 races at the GP in Indy. I came home and bought one the following week.

Sweeeet.
Barry

[M@gneto]

Very nice. Did those Street Bob wheels bolt right on?

Originally Posted by yellowjam

Hi folks,
this is my XR1200SC "The Scrambler". In my opinion this is the bike lot's of people would like to get offered from the MOCO. This is one of two Harley's i own. My other one is a Dyna Glide. I like to convert my Harley's with (mostly)used other HD parts, but want to beware the "Original HD Look". So i do the same as the MOCO - take something from this and that model and: VOILA! Create a new Bike...
Before you ask, here is the parts list:
- powder coated wheels from a 2008 Street Bob
- tyres 110/80R19 & 150/70R17 Metzeler Karoo
- LSL upper plate of triple tree
- 7" Headlight Euro-Style
- Puig lamp mask
- LSL Stahlflex brakelines in front
- Hyperpro dampers front fork kit
- 16" rear shocks from HD Street Rod
- rearlight cover jp cycles
- derby cover No1
- Corbin gunfighter and lady seat
- K&N filter, remove airbox flapper (Euro Version), trick-plug in
- Nightrider OIED sensor tuning
This bike is not yet finished, stay tuned for the upgrates.

[yellowjam]

The bearings are the same size: 1".
You need a pully spacer of 20mm, a spacer left side (brake side) 11mm, a spacer right side (pully side) 18mm
So, go on and do it!

[M@gneto]

That is an incredible looking bike and now you have the right size wire wheels for a good adventure tire selection. You have me thinking.

Originally Posted by yellowjam

The bearings are the same size: 1".
You need a pully spacer of 20mm, a spacer left side (brake side) 11mm, a spacer right side (pully side) 18mm
So, go on and do it!

[Kentucky]

I would like to have a set of black stock pipes/mufflers hanging in my garage. Anybody have a set?

[Kentucky]

Any XR1200 owners headed to the Grand National Championship race in Calistoga, Ca this Saturday. If so, look me up.

Barry Boone