ADVrider

Go Back   ADVrider > Gear > Equipment
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 02-12-2012, 01:37 PM   #11
Rabbot
rain+superbike=adventure
 
Rabbot's Avatar
 
Joined: Jul 2008
Location: Asheville NC
Oddometer: 549
one addition

Quote:
Originally Posted by travelprof View Post
Here is my ever evolving tool kit for my KLR650s.



1. Motion Pro T-6 Chain Tool + T6 Trail Bead
2. Motion Pro Tool Metric + 16 mm and 14 mm sockets
3. Stop & Go portable mini-air compressor + tube repair kit
4. Air pressure gauge 60 psi max (Accu-Gage RA60X)
5. Motion Pro Ball End Allen Set 9PC (1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10 mm)
6. Husky Pro 3/8″ Drive Pearhead Ratchet Model 22800 + 3/8 to 1/4 adapter
7. Motion Pro T6 Combo Lever (27 mm) + 3/8 inch to 1/4 inch adapter
8. Motion Pro T6 Combo Lever (12mm/13mm)
9. Pittsburgh 7 Piece Metric Ratcheting Combo Wrench Set (17, 15, 14, 13, 12, 10, 8 mm)
10. Craftsman Metric Crowfoot Wrenches (17 mm and 19 mm)
11. Jack made from crutch (velcro strap to engage front break)
12. Phillips and flat short screw drivers
13. Screw driver with set of phillips + flat tips from Chapman 7500 tool kit.
14. 3/8 drive metric deep sockets (13, 12, 10, 8 mm)
15. Husky 8-Piece Bit Ratchet Set
16. JB KWIX (fast curing version of JB WELD)— Each inside a plastic tube. Popsicle sticks for mixing
17. Black electrical tape wrapped around the tube that holds the orange JB KWIX
18. Blue duct tape wrapped around the tube that holds the blue JB KWIX
19. Red (271) and blue (242) Loctite (thread locker)
20. Zip ties of several sizes
21. Craftsman 7 in. Adjustable Pliers (Germany)
22. Craftsman 6 in. Beak Jaw Adjustable Wrench (Extra-wide jaw)
23. Craftsman 6 in. Long Nose Pliers (USA)
24. Leatherman Wave tool
25. Telescopic magnetic pickup tool
This looks like an excellent kit. I might add a pair of vise grips. While racing an enduro about 30 years back I was able to not only get out of the woods but finish the race after I lost the front axel nut. Found the axel. Clamped vice grips on where nut would normally reside, wrapped aircraft wire around the handle of vice grip and fork tube then electrical tape to hold in the closed position and prevent spinning. Worked like a charm. Wish I invented the idea but I had read about it somewhere.
Rabbot is offline   Reply With Quote
 

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 03:24 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014