The Africa Twin thread - Page 754

GSPD750 · 05-28-2012, 01:22 PM

Quote:

Originally Posted by tserts

My freaking side stand gave up! Just as I parked outside the bank doing some chores today, I took it out and proceeded to descending only to realize that the bike didn't stop where it should but kept on going until crashing on the ground...

I managed to stay out of its way and when I picked her back up, I noticed the side-stand was facing towards the front (90 degrees clockwise further from where it should be..

It has failed at the top, right below the bolt.

Would you recommend getting a used one or welding the trashed one?

I admit that I didn't treat the side stand very gently but I believe it's kind of rare to get that, especially on a 2000 model...

I would buy a new one.

dwdufour · 05-28-2012, 01:31 PM

Air filter is super dirty. Waiting on the new one to arrive. I'm thinking that is my problem. I'll find out in a couple of days. I hate the mini indicators, I'm considering modifying the pannier rack.

Reidy008 · 05-28-2012, 02:56 PM

I finally tore up the last of the stock fender and need to put on a high fender. What recommendations can you guys offer? Cheers

GSPD750 · 05-28-2012, 06:19 PM

Quote:

Originally Posted by Reidy008

I finally tore up the last of the stock fender and need to put on a high fender. What recommendations can you guys offer? Cheers

If you can avoid that Arizona red clay/mud...well... you'll be just fine.

I personally like the OEM AT front fender setup...but if your looking for change i would suggest African Queens website for some ideas.

http://www.africanqueens.de/html/willk-en.html

diskow · 05-29-2012, 12:23 AM

Quote:

Originally Posted by gpmucci

Ciao, just some photo the last work I did for a friend:
You could find more photo on Fb under my name Mucci Gian Paolo.

Inviato dal mio HTC EVO 3D X515m con Tapatalk 2

Paolo -
Amazing creaturas one more time !!!!
Bravo !

DC,Chad · 05-29-2012, 12:53 AM

Quote:

Originally Posted by gpmucci

Ciao, just some photo the last work I did for a friend:

2

out of curiosity where have you re-located the oil cooler ?

atgreg · 05-29-2012, 01:03 AM

Quote:

Originally Posted by Reidy008

I finally tore up the last of the stock fender and need to put on a high fender. What recommendations can you guys offer? Cheers

acerbis supermoto

tserts · 05-29-2012, 03:59 AM

Quote:

Originally Posted by GSPD750

I would buy a new one.

Yeah that would be ideal, but for now I will have to go for a less costly solution. I found a used one for 25 euros, which is acceptable even as a temporary solution (I can't use the bike right now, too risky).

The question is this: Will an RD04 stand fit on an RD07?

The one I found comes from a 95 model, mine is a 2000. It's the whole stand, with the triangular metal and the left peg...

Squily · 05-29-2012, 08:01 PM

Quote:

Originally Posted by atgreg

acerbis supermoto

+ 1

cirica · 05-29-2012, 11:57 PM

SEE ON http://www.advrider.com/forums/showt...8#post18796248
FOR SUSPENCIONS AND TANK FOR AT 650 -750

I DON'T KNOW HAW TO PUT FOTO.......PLEASE!!! TELL THE WAY

cas121 · 05-30-2012, 07:54 AM

Quote:

Originally Posted by tserts

Yeah that would be ideal, but for now I will have to go for a less costly solution. I found a used one for 25 euros, which is acceptable even as a temporary solution (I can't use the bike right now, too risky).

The question is this: Will an RD04 stand fit on an RD07?

The one I found comes from a 95 model, mine is a 2000. It's the whole stand, with the triangular metal and the left peg...

95 would be an RD07 and yours an RD07a so that should bolt on without a problem as far as I know. haven't tested it though

Pulasky · 05-30-2012, 09:39 AM

I have got Transalp 650 carbs in my AT RD03, but with stock air filter engine run to rich, I've made own intake like this did a short test and it seems to work well.

boboneleg · 05-30-2012, 12:13 PM

Quote:

Originally Posted by cirica

SEE ON http://www.advrider.com/forums/showt...8#post18796248
FOR SUSPENCIONS AND TANK FOR AT 650 -750

I DON'T KNOW HAW TO PUT FOTO.......PLEASE!!! TELL THE WAY

Use Photobucket or similar and link it to your post.

cirica · 05-31-2012, 06:07 AM

Quote:

Originally Posted by boboneleg

use photobucket or similar and link it to your post.

thanks! I will try

tserts · 05-31-2012, 12:23 PM

Quote:

Originally Posted by cas121

95 would be an RD07 and yours an RD07a so that should bolt on without a problem as far as I know. haven't tested it though

Thanks Cas, I had a friend of mine pick it up today, I will install it on the weekend..

05-28-2012, 02:56 PM	#11298
Reidy008 I,m in if we go fast Joined: Jan 2010 Location: Peoria, AZ Oddometer: 1,438	High fender mod I finally tore up the last of the stock fender and need to put on a high fender. What recommendations can you guys offer? Cheers

05-29-2012, 11:57 PM	#11305
cirica Adventurer Joined: Jan 2012 Location: GREECE, ALL IN ONE ! Oddometer: 11	Info for parts SEE ON http://www.advrider.com/forums/showt...8#post18796248 FOR SUSPENCIONS AND TANK FOR AT 650 -750 I DON'T KNOW HAW TO PUT FOTO.......PLEASE!!! TELL THE WAY

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-28-2012, 01:31 PM	#11297
dwdufour Adventurer Joined: Mar 2011 Location: Tüddern, Germany / Dutch border Oddometer: 37	Air filter is super dirty. Waiting on the new one to arrive. I'm thinking that is my problem. I'll find out in a couple of days. I hate the mini indicators, I'm considering modifying the pannier rack.

05-30-2012, 09:39 AM	#11307
Pulasky Gnarly Adventurer Joined: Oct 2007 Location: Poland Oddometer: 242	I have got Transalp 650 carbs in my AT RD03, but with stock air filter engine run to rich, I've made own intake like this did a short test and it seems to work well.