![]() |
07-09-2012, 10:44 PM
|
#3376 |
|
plainsman
Joined: Nov 2005
Location: out in the great wide open
Oddometer: 89,823
|
Also, the jets in the add-on include effects of G-forces. If you fly in cockpit view and pull a tight turn at speed, your vision blacks out starting at the periphery.
__________________
_______ |
|
|
07-10-2012, 07:49 AM
|
#3377 |
|
Beastly Adventurer
Joined: Jul 2009
Oddometer: 2,126
|
...but when you start to see the gray out with a simulator you can still reach for that cup of coffee sitting next to the mouse......However, there's a good deal of evidence that motion simulators in airline training add little, if any, added training benefit but they do add a lot expense. I'm not ragging on desk-top sims, I think for initial exposure they probably are quite good. For example, I know very little about helicopters and maybe using a desk top sim I could get at least the basics down.
|
|
|
07-10-2012, 12:22 PM
|
#3378 |
|
plainsman
Joined: Nov 2005
Location: out in the great wide open
Oddometer: 89,823
|
So far, I have been utterly unable to control any helicopter I try on the simulator.
__________________
_______ |
|
|
07-10-2012, 12:53 PM
|
#3379 |
|
Beastly Adventurer
Joined: Jul 2009
Oddometer: 2,126
|
What helicopter sim did you try?
It is said if you can fly the simulator you'll have little or no trouble with the actual aircraft and so far for me that seems to be true. Although...I heard a story of a helicopter sim instructor when faced with the actual aircraft did terrible with it. Could have just been a story. |
|
|
07-10-2012, 03:36 PM
|
#3380 | ||
|
Beastly Adventurer
Joined: Jul 2010
Location: Central Florida
Oddometer: 1,410
|
Quote:
I am almost the opposite. Sims have always been hard for me to work with. With no inertial feedback, limited sight, etc. All of my actual flight time (less than 10 hours at this time) has been very easy and made MUCH more sense on what I need to be doing and when.
__________________
1974 BMW R90/6 Bettie #1 Quote:
|
||
|
|
07-10-2012, 03:50 PM
|
#3381 | |
|
1.5 Finger Discount
Joined: Apr 2007
Location: DFW, Texas
Oddometer: 20,097
|
Quote:
__________________
"Try turning that burn into torque. Then we're getting somewhere. Riding the potato to work seems quite impractical." - anotherguy "Never bring a Nerf gun to a shovel fight." - My Brother |
|
|
|
07-10-2012, 03:52 PM
|
#3382 | |
|
1.5 Finger Discount
Joined: Apr 2007
Location: DFW, Texas
Oddometer: 20,097
|
Quote:
Often you have to input left or right rudder as you add or subtract collective to keep 'em straight.
__________________
"Try turning that burn into torque. Then we're getting somewhere. Riding the potato to work seems quite impractical." - anotherguy "Never bring a Nerf gun to a shovel fight." - My Brother |
|
|
|
07-10-2012, 04:03 PM
|
#3383 |
|
Avoiding the Skid-Demon
Joined: Jan 2005
Location: 22310
Oddometer: 6,799
|
I have flown nearly every FS since SubLogic 1.0 for the old Apple. I also hold a (now expired) sailplane license, have sat in the jumpseat of a 737-400, and a C-141, while in flight. On the 737 I enjoyed an hour up front, including the entire landing sequence and taxi to the ramp before I decamped back to my seat.
What I'll say, is FS's have the potential to teach the fundamentals of flight, if the student is paying attention and doesn't turn all the controls to the "easy" side. Unlink your rudder from your ailerons, turn on all the realism settings so your gyro wanders, manually set your IFR radios and instruments, and you have a fair idea of what cockpit management can be like. The dynamics of actual flight will be easy for some, difficult for others. Much depends on your eye-hand coordination, steady stomach, fear of heights, and intuitive attention to detail. Spending months on an FS will prepare you for some things, especially ground school, air control and navigation issues (if all that's on), and the primary essentials of lift, drag, axis of control, slip/skid, stalls, spins, etc. Cockpit time has no substitute, either for effective teaching, or the fun factor.
__________________
Chris, Proprietor of The Tidewater Forge Hot iron is my passion. Fire is my mistress. Let's dance. |
|
|
07-10-2012, 05:17 PM
|
#3384 |
|
Beastly Adventurer
Joined: Jul 2009
Oddometer: 2,126
|
The thing about simulators is to take it as a fork in the road situation. Ask yourself am I ever going to want go on to actual flight? If there's that chance then I think most people's approach needs to changed. Playing around is fun, but one would have to, or should, apply oneself to a more disciplined approach because down the road you'll have a lot of techniques or styles that will really need some serious undoing, and there would be a good chance you'd be spending more time (and money) doing that than if you started from scratch. I've instructed in transport aircraft sims and I coach in swimming. I see people all the time who didn't learn the better swim techniques years ago, and some of them, most actually, have a real tough time changing. The people in the sim? Not so much. They started out with an intentional goal and made sure all their time counted before moving up to that aircraft.
|
|
|
07-10-2012, 05:59 PM
|
#3385 |
|
.
Joined: Feb 2005
Oddometer: 9,779
|
Maybe I should have framed the sim discussion better.
I am talking about VFR in a 172. Just the beginner, first 50 hours stuff. X-Plane 10 is getting high marks for the physics. The cost of the computer isn't really a factor. I am already on the hook for a new one before school starts. The controls and software would be an incremental expense. |
|
|
07-10-2012, 06:14 PM
|
#3386 |
|
Avoiding the Skid-Demon
Joined: Jan 2005
Location: 22310
Oddometer: 6,799
|
Get good controls, then, not a $50 Saitek joystick. You want a yoke, throttle quadrant, and rudder pedals, to best mimic the student experience.
__________________
Chris, Proprietor of The Tidewater Forge Hot iron is my passion. Fire is my mistress. Let's dance. |
|
|
07-10-2012, 06:30 PM
|
#3387 |
|
.
Joined: Feb 2005
Oddometer: 9,779
|
|
|
|
07-10-2012, 06:32 PM
|
#3388 |
|
Avoiding the Skid-Demon
Joined: Jan 2005
Location: 22310
Oddometer: 6,799
|
__________________
Chris, Proprietor of The Tidewater Forge Hot iron is my passion. Fire is my mistress. Let's dance. |
|
|
07-10-2012, 07:45 PM
|
#3389 |
|
No, not that Trixie
|
__________________
---------------------------------------------------- One of the penalties for refusing to participate in politics is that you end up being governed by your inferiors. - Plato The important thing is this: To be able at any moment to sacrifice what we are for who we could become! Charles Dubois |
|
|
07-10-2012, 08:28 PM
|
#3390 | ||
|
Deck Spotter
Joined: Jul 2005
Location: Boise
Oddometer: 1,707
|
Update on the P-40 found in Egypt
The historians managed to track down the details on the P-40 that was found earlier in the year.
Article here Quote:
Quote:
__________________
"Ain't nobody ever got the "Go" code yet." -- Major Kong |
||
|
|
![]() |
| Share |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|