KTM 690 Enduro owners show off your bike ! - Page 90

Evil Invader · 09-07-2012, 07:47 AM

Èllo!

1. Do you know if your fairing ( Berglunds ) fits without any problems to a 690 Rally Replica ? Should do. Tanks are the same afaik
2. If yes, is this made from fiberglass or carbon ? Carbon
3. Do you know if he has some more to sell ? No idea
4. how much is the fairing ? No idea

Night Falcon · 09-13-2012, 11:09 PM

New tires for spring/summer

LethPhaos · 09-14-2012, 02:02 AM

lucky you, over here the fall season is starting :)

Buzztail · 09-14-2012, 06:58 AM

goosecreek · 09-15-2012, 04:40 AM

Alright guys what should I demand to be replaced?
A lady was running about 30 and hit the tire and right box with her car driving it up and forward throwing me off .
I made the boxes ane rack myself . The rack will have to be remade the box ca be fixxed , I am concerned with the tank. The rack was bolted at both bottom bolts and the rear tank bolt .
I am worried about the well nuts in the top of the tank.
I know that the picture is not that good but is there anything else I should be concerned with due to the jarring from the impact?

smokeeater495 · 09-15-2012, 11:18 AM

Quote:

Originally Posted by goosecreek

Alright guys what should I demand to be replaced?
A lady was running about 30 and hit the tire and right box with her car driving it up and forward throwing me off .
I made the boxes ane rack myself . The rack will have to be remade the box ca be fixxed , I am concerned with the tank. The rack was bolted at both bottom bolts and the rear tank bolt .
I am worried about the well nuts in the top of the tank.
I know that the picture is not that good but is there anything else I should be concerned with due to the jarring from the impact?

I would consider submitting an estimate for commercially available racks and boxes as well as any KTM parts that need replaced.

Night Falcon · 09-15-2012, 02:34 PM

Quote:

Originally Posted by smokeeater495

I would consider submitting an estimate for commercially available racks and boxes as well as any KTM parts that need replaced.

Same. Plus I'd be looking at possible wheel damage, stress loading on the tank mounts & suspension damage. If something has been bent or stressed even slighty it may not be apparant for a while. For that reason I would be insisting her insurance forks out for a new rear end. I Don't think that is unreasonable in this situation given it is unlikely the insurance will wan't to know you if they have paid out for superficial repairs and you latter discover your tank or rear suspender has problems.

creedyflyr · 09-15-2012, 03:48 PM

Finally after months of lurking these forums & saving enough money, I picked this up last weekend,Already ditched the standard muffler, air filter, number plate extension & upper tank bolts. These things are too much fun, I dont think the XR 400 it replaced will see much action any more.
Creedy.

BK.RD.RNR · 09-15-2012, 05:17 PM

Quote:

Originally Posted by Night Falcon

Same. Plus I'd be looking at possible wheel damage, stress loading on the tank mounts & suspension damage. If something has been bent or stressed even slighty it may not be apparant for a while. For that reason I would be insisting her insurance forks out for a new rear end. I Don't think that is unreasonable in this situation given it is unlikely the insurance will wan't to know you if they have paid out for superficial repairs and you latter discover your tank or rear suspender has problems.

This.

goosecreek · 09-16-2012, 12:23 AM

Thanks guys I will show her off again when she is back and ready to flog.

gordons · 09-16-2012, 01:16 AM

Quote:

Originally Posted by creedyflyr

Finally after months of lurking these forums & saving enough money, I picked this up last weekend,Already ditched the standard muffler, air filter, number plate extension & upper tank bolts. These things are too much fun, I dont think the XR 400 it replaced will see much action any more.
Creedy.

Nice one, everytime I swing my leg over my 690 I still get goosebumps and don't regret for selling my XR650R.

I take it you have fitted the second or upper heatshield on the exhaust after these photos.

Swap · 09-17-2012, 10:07 AM

Bardenas desert

zxrider11 · 09-17-2012, 06:10 PM

Just got my new 2012. Already have 150 miles on it so far.

The bike runs great right from the factory - very happy with the fuel injection, suspension, and brakes.

tommi79 · 09-22-2012, 12:10 AM

My personal 690 evolution.....

I will upload final rally set as soon as finished!!

Night Falcon · 09-22-2012, 12:59 AM

Quote:

Originally Posted by tommi79

My personal 690 evolution.....
I will upload final rally set as soon as finished!!

lookin good

09-07-2012, 07:47 AM	#1336
Evil Invader Studly Adventurer Joined: May 2006 Location: Hell-sing-land, Sweden Oddometer: 592	Èllo! 1. Do you know if your fairing ( Berglunds ) fits without any problems to a 690 Rally Replica ? Should do. Tanks are the same afaik 2. If yes, is this made from fiberglass or carbon ? Carbon 3. Do you know if he has some more to sell ? No idea 4. how much is the fairing ? No idea __________________ 690 "DIY" thread (incl. "Rallybike build"): http://advrider.com/forums/showthread.php?t=708813 M Motoadventures

09-13-2012, 11:09 PM	#1337
Night Falcon Adventure NZL Joined: Dec 2008 Location: on the off road Oddometer: 858	New tires for spring/summer __________________ "You cannot harm me...my wings are like shields of steel" - Batfink My KTM 690

09-14-2012, 02:02 AM	#1338
LethPhaos Gnarly Adventurer Joined: Aug 2012 Location: Belgium Oddometer: 157	lucky you, over here the fall season is starting :) __________________ \| KTM 690 SMC \| Honda Africa Twin \|

09-15-2012, 04:40 AM	#1340
goosecreek just a spoke Joined: May 2010 Location: dreaming of a ride Oddometer: 1,233	Well here is mine Alright guys what should I demand to be replaced? A lady was running about 30 and hit the tire and right box with her car driving it up and forward throwing me off . I made the boxes ane rack myself . The rack will have to be remade the box ca be fixxed , I am concerned with the tank. The rack was bolted at both bottom bolts and the rear tank bolt . I am worried about the well nuts in the top of the tank. I know that the picture is not that good but is there anything else I should be concerned with due to the jarring from the impact? __________________ Man this heated gear is great. tomc407

09-16-2012, 12:23 AM	#1345
goosecreek just a spoke Joined: May 2010 Location: dreaming of a ride Oddometer: 1,233	Thanks guys I will show her off again when she is back and ready to flog. __________________ Man this heated gear is great. tomc407

09-15-2012, 03:48 PM	#1343
creedyflyr Adventurer Joined: Jan 2011 Location: Port Stephens NSW Australia Oddometer: 88	Finally after months of lurking these forums & saving enough money, I picked this up last weekend,Already ditched the standard muffler, air filter, number plate extension & upper tank bolts. These things are too much fun, I dont think the XR 400 it replaced will see much action any more. Creedy.

09-17-2012, 10:07 AM	#1347
Swap Adventurer Joined: Oct 2009 Location: Paris/Provence Oddometer: 25	Spanish Pyrénées Bardenas desert __________________ Pierre SwaP https://picasaweb.google.com/1013119...eat=directlink

09-17-2012, 06:10 PM	#1348
zxrider11 Gnarly Adventurer Joined: Jan 2010 Location: West Michigan Oddometer: 112	Just got my new 2012. Already have 150 miles on it so far. The bike runs great right from the factory - very happy with the fuel injection, suspension, and brakes.

09-22-2012, 12:10 AM	#1349
tommi79 n00b Joined: May 2011 Location: Romagna, ITALY Oddometer: 8	My personal 690 evolution..... I will upload final rally set as soon as finished!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode