|10-07-2012, 05:45 PM||#1|
Joined: Feb 2010
Location: mom's ovaries & dad's balls
This is me just messing around trying to learn things for a future wiring harness redoo.
I have a computer power supply unit hooked up and turned on. I connect a turn signal directly to it (+12V and GND), and it turns on.
I add the flasher relay (2 pronged) off my motorcycle to the circuit and it still turns on but doesn't flash.
Shouldn't adding the flasher relay to the circuit make it flash? Am I missing something here?
The prongs on the relay are labeled B and L (I'm assuming for battery and light).
I connected B to ground. L is connected to the blinker. The other wire from the blinker is connected to +12V. It turns on but doesn't flash.
indr screwed with this post 10-07-2012 at 07:09 PM
|Thread Tools||Search this Thread|