|10-08-2012, 03:12 PM||#1|
Joined: Oct 2007
winter gloves for short fat hands?
Another winter glove thread I know I know...
I actually have normal hands, but I want a pair of gloves to wear over powerlet heated liners. To give you an idea of fit, I ordered a pair of Held Warm n' Dry gloves in size 7. They fit great with the only caveat being the fingers are ever so slightly too long. If I were not planning on wearing liners underneath I would keep these and be happy. But with the liners on they are just too tight and are not comfortable. I could go up a size, but then I'll end up with fingers that are too long. So now I'm on the quest for a glove that fits a little wider/shorter so I can get a good fit with heated liners underneath. Some of the features I'm looking for:
preferably gore-tex xtrafit or similar. i.e. the liner is bonded to the shell of the glove so it doesn't come out when you take your hand out.
thin/uninsulated palm: for good control feel. I realize the heated liners will add to the bulk but it's better than starting off with a glove that's already bulky.
pre-curved: I've found that gloves with internal liners bunch up at the palm if they aren't precurved.
under the cuff gaunlet: to keep the rain out.
good protective bits like hard knuckles.
|Thread Tools||Search this Thread|