Call all XR600R!!! - Page 405

STFU · 10-24-2012, 01:04 PM

Quote:

Originally Posted by elsalvadorklr

thought stock was 39 but anyways...

I have mine but im en el salvador...shipping might not be worth it, however mine has been rebuilt, has a custom choke flap, new float valve and needle, new splash guard, new gaskets, new acv valve and new fuel screw...so its a great runner...

pleanty of jets too..

cheers

Could be 39, I just assumed as many 600-650s seem to use 40mm. Yours sounds like great, but probably to expensive to ship. Ill keep it in mind incase I dont find one closer.

Thanks, Dan

elsalvadorklr · 10-24-2012, 01:40 PM

yup..let me know

....get one that has been rebuilt...or at least has a new float valve or acv valve, these are the things that cause the most issues with idling and poor performance...

sometimes getting a cheap one bites you in the butt

jesusgatos · 10-24-2012, 03:47 PM

Any interest in carb adapters for the newer-style FCR MX carbs? I used one of Noss' universal FCR adapters on my 650R with a 39mm FCR off a late-model CRF450 and it ripped, but the adapter dimensions weren't quite right. So we're going to have them make some custom adapters for the XR650R and the XR650L. I don't have a 650R anymore, but my buddy James wants one and I need to have some 650L adapters made for these bikes. Figured we might as well make them available. His regular universal adapters cost $65, so am guessing these will probably be a little bit more expensive, but can't imagine they'll end up costing any more than $80. It's pretty easy to find good deals on used FCR MX carbs ($300?) because there are so many of them out there (being used on virtually all of the modern 450cc motorcross bikes). So this can be a relatively low-cost upgrade, and the performance is flat-out awesome. Fitment is also pretty straightforward. There are no clearance issues, so this is literally a bolt-in deal and you can even use the stock FCR throttle cables and twist-grip (stock CRF cables are perfect length with aftermarket tripleclamps and taller bars).

We're definitely going to make the XR650R and XR650L adapters, and I have all the dimensions for the XR600 adapters, but I'd like to know if there's any demand for an XR600 version before we shell-out a bunch of money. So please shoot me a PM if you want one!

elsalvadorklr · 10-24-2012, 04:47 PM

man

those in the know say that by and far the fcr39mm is a better fit and performance in the case of the xr600, the 41mm is a bit big and needs more tuning and or mods to work perfect...at least those that have done these swaps a lot...

too bad...

I got my flatslide which is no pumper or fcr BUT its good for now

maybe next year for me!

jajaja

cheers

therealbigman · 10-24-2012, 05:14 PM

Sure why not , I have this for my L but havent pullked the trigger on the Noss , My understanding is its a bit of a sloppy fit to te boot .

elsalvadorklr · 10-24-2012, 05:48 PM

speaking of carbs and whatnot whats your opinion of this?

Wattner · 10-24-2012, 06:47 PM

Quote:

Originally Posted by elsalvadorklr

speaking of carbs and whatnot whats your opinion of this?

Oh Oh Oh Me Me Me!!!!

That is a spark plug!!!!

JAB · 10-24-2012, 08:47 PM

Quote:

Originally Posted by elsalvadorklr

speaking of carbs and whatnot whats your opinion of this?

Looks pretty good. My bad eyes can't tell about the center electrode. Maybe a tick lean BUT not bad.

Royal Club · 10-25-2012, 03:59 AM

Quote:

Originally Posted by elsalvadorklr

speaking of carbs and whatnot whats your opinion of this?

looks pretty lean to me..

mcma111 · 10-25-2012, 05:01 AM

Hey Christian,

I am buying ShooterDaves XR400 oil cooler for ya.

http://advrider.com/forums/showthrea...0#post19895860

elsalvadorklr · 10-25-2012, 09:14 AM

Quote:

Originally Posted by Wattner

Oh Oh Oh Me Me Me!!!!

That is a spark plug!!!!

ok WATTNER since Im quite the smartass myself have a beer on me! you get 100 points!

or if and when you guys get down here a real beer at the bar...

YES ITS A SPARKPLUG! its a cool ngk dpr8ea-9, or for those that dont know a normal riding plug for the xr600 and xrl

jejejejejeje

any comments on how its burning would be cool since its showing what a rejetted mikuni flatslide and HRC CAM by cw do to normal fuel consumption aka it goes insanely rich if you leave the jets how they were before the swap

christian

elsalvadorklr · 10-25-2012, 09:17 AM

Quote:

Originally Posted by mcma111

Hey Christian,

I am buying ShooterDaves XR400 oil cooler for ya.

http://advrider.com/forums/showthrea...0#post19895860

no shit?

can you keep it till christmas?

need to save up! or wait for my wifes present! jajaja

I gave up on finding an appropriately sized cooler here...that and most are solid steel and all rusty looking...

I can do with make lines and or adapters here at any of the industrial hose shops...I made a bunch for my truck here including the powersteering lines...

elsalvadorklr · 10-25-2012, 09:20 AM

Quote:

Originally Posted by JAB

Looks pretty good. My bad eyes can't tell about the center electrode. Maybe a tick lean BUT not bad.

Ill show you guys a pic of the plug before the jet down..it had a 230main and needle at richest clip

the center electriode is that grey tan color all the way down...

Im trying to get this perfect so I can get all the punch from this cam swap!

it really is making a difference once the jetting gets tuned...massive amounts of midrange and I can keep a gear longer or rev it out more which is taking A LOT to get used too! since the xr is famous for shortshifting and or lugging gears...

here is a pic of a DPR 9 plug or one cooler that I was using for high speed runs...its looks more tan and it had the needle at richest setting...jet was a 220 however I had a flattness at 3/4 throttle and my intake was stained red with fuel....

mcma111 · 10-25-2012, 10:31 AM

[QUOTE=elsalvadorklr;19897379]no shit?

can you keep it till christmas?

need to save up! or wait for my wifes present! jajaja

QUOTE]

You mean the present where she tells you she has a bun in the oven.

elsalvadorklr · 10-25-2012, 10:39 AM

tell me about it! that aint no christmas present! jajajajajajajajajajajajajajajja

no I was thinking:

hey hunny what do you want for christmas???? and I would say

AN XR400 cooler that steve has for me

yeah wishful thinking huh?

10-24-2012, 03:47 PM	#6063
jesusgatos fishing with dynamite Joined: Nov 2006 Location: on the road Oddometer: 2,035	Any interest in carb adapters for the newer-style FCR MX carbs? I used one of Noss' universal FCR adapters on my 650R with a 39mm FCR off a late-model CRF450 and it ripped, but the adapter dimensions weren't quite right. So we're going to have them make some custom adapters for the XR650R and the XR650L. I don't have a 650R anymore, but my buddy James wants one and I need to have some 650L adapters made for these bikes. Figured we might as well make them available. His regular universal adapters cost $65, so am guessing these will probably be a little bit more expensive, but can't imagine they'll end up costing any more than $80. It's pretty easy to find good deals on used FCR MX carbs ($300?) because there are so many of them out there (being used on virtually all of the modern 450cc motorcross bikes). So this can be a relatively low-cost upgrade, and the performance is flat-out awesome. Fitment is also pretty straightforward. There are no clearance issues, so this is literally a bolt-in deal and you can even use the stock FCR throttle cables and twist-grip (stock CRF cables are perfect length with aftermarket tripleclamps and taller bars). We're definitely going to make the XR650R and XR650L adapters, and I have all the dimensions for the XR600 adapters, but I'd like to know if there's any demand for an XR600 version before we shell-out a bunch of money. So please shoot me a PM if you want one! __________________ GatosBros · Crux Studio · Trails Less Traveled

10-24-2012, 05:14 PM	#6065
therealbigman bout a dollar 3.98 Joined: Jul 2010 Location: Texas Gulf Coast Oddometer: 3,047	fcr adapter for the L Sure why not , I have this for my L but havent pullked the trigger on the Noss , My understanding is its a bit of a sloppy fit to te boot . __________________ Marko 08 xr650l 99 xr650l 84atc200s 85atc200s 80ct110 99xr70 04xr50 85atc70 87trx70 Dumb ass people do dumb ass things

10-25-2012, 05:01 AM	#6070
mcma111 Beastly Adventurer Joined: Jul 2007 Location: San Francisco,Ca. Oddometer: 7,999	Oil Cooler Hey Christian, I am buying ShooterDaves XR400 oil cooler for ya. http://advrider.com/forums/showthrea...0#post19895860 __________________ Steve in SF BMW's 58 R26 79 R100s 91 R100gs 87 Harley FXRS-SP ~ 06 KTM 625 SMC ~ 72 Honda CB750/915cc ~ 92 XR600/654cc ~ 95 XR650l/675cc ~ 03 CRF450r ~ 05 CRF450x ~ 02 XR650l/675cc ~ 86 YZ490 ~ 93 YZ80 ~ 93 XR650l Project

10-25-2012, 10:31 AM	#6074
mcma111 Beastly Adventurer Joined: Jul 2007 Location: San Francisco,Ca. Oddometer: 7,999	Present [QUOTE=elsalvadorklr;19897379]no shit? can you keep it till christmas? need to save up! or wait for my wifes present! jajaja QUOTE] You mean the present where she tells you she has a bun in the oven. __________________ Steve in SF BMW's 58 R26 79 R100s 91 R100gs 87 Harley FXRS-SP ~ 06 KTM 625 SMC ~ 72 Honda CB750/915cc ~ 92 XR600/654cc ~ 95 XR650l/675cc ~ 03 CRF450r ~ 05 CRF450x ~ 02 XR650l/675cc ~ 86 YZ490 ~ 93 YZ80 ~ 93 XR650l Project

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-24-2012, 01:40 PM	#6062
elsalvadorklr Beastly Adventurer Joined: Nov 2008 Location: el salvador Oddometer: 3,961	yup..let me know ....get one that has been rebuilt...or at least has a new float valve or acv valve, these are the things that cause the most issues with idling and poor performance... sometimes getting a cheap one bites you in the butt

10-24-2012, 04:47 PM	#6064
elsalvadorklr Beastly Adventurer Joined: Nov 2008 Location: el salvador Oddometer: 3,961	man those in the know say that by and far the fcr39mm is a better fit and performance in the case of the xr600, the 41mm is a bit big and needs more tuning and or mods to work perfect...at least those that have done these swaps a lot... too bad... I got my flatslide which is no pumper or fcr BUT its good for now maybe next year for me! jajaja cheers

10-24-2012, 05:48 PM	#6066
elsalvadorklr Beastly Adventurer Joined: Nov 2008 Location: el salvador Oddometer: 3,961	speaking of carbs and whatnot whats your opinion of this?

10-25-2012, 10:39 AM	#6075
elsalvadorklr Beastly Adventurer Joined: Nov 2008 Location: el salvador Oddometer: 3,961	tell me about it! that aint no christmas present! jajajajajajajajajajajajajajajja no I was thinking: hey hunny what do you want for christmas???? and I would say AN XR400 cooler that steve has for me yeah wishful thinking huh?