|10-25-2012, 09:26 AM||#9751|
Allergic to Asphalt!
Joined: Oct 2004
Location: Thousand Oaks, Ca.
Does it fit up to the OEM can or do you have to have a FMF can?
So Many Idiots, So Few Comets!!!!!!!!!
|10-25-2012, 10:04 AM||#9752|
Joined: Feb 2006
I had an fmf can on this header, but that same fmf can fit with the stock header. So to me that = it will fit a OEM can.
|10-25-2012, 11:57 AM||#9753|
Joined: Nov 2008
Location: Hopefully on a bike
Bunch of Womens Leather Jackets
Posted over on Flea Market--Gear,
Don't make the mistake of believing everything you think.
|10-25-2012, 10:28 PM||#9754|
Joined: Jul 2012
Location: Colorado Springs, CO
My 1998 Pontiac Trans Am on CL
In no hurry to sell it but it's just sitting and doing me no good. I shouldnt have held on to it this long after losing interest in it.
Pics are not recent. Working on recent pics. http://s253.photobucket.com/albums/h...%20Trans%20Am/
For my asking price I will include EFILive, all cables, up to date with 7 credits.
$6,500 OBO. Trade options listed below. Can do pics upon request until I get them in the ad. I'm not in a hurry to sell it, so please don't think you can low ball your way into a deal. At least attempt to wine and dine me with some good haggling.
Buyer pays shipping, tax, title, license. I have a few people I could recommend for good shipping quotes though.
1998 Pontiac Trans Am
Clear Kentucky Title in my name
The car runs good and pulls extremely hard, but has been a pain to get started lately. Requires a jump and some TLC.
2,xxx miles since all modifications
Car turned 404hp/391tq AT SEA LEVEL. Numbers will be lower here.
At R.P.M. in Garner, NC, the car was custom tuned by Ryan Robinson who also built the fastest Nitrous LS based car and held the record for three years and also built the fastest SUV in the country at the time.
Has not been on the track since it was stock so no times.
Has been in storage since 2008. It has a few rough spots as well as some dust and dirt from sitting inside a dusty shop.
5.3l heads, ported, polished, milled to 58cc chambers
Futral Motorsports F13 Cam, 230/232, .595/.585, 112LSA
Comp 918 beehive valve springs
Stock rocker arms
Cometics head gaskets, .042
BBK intake (powdercoated intake)
Ported and polished LS6 throttle body
MTI induction lid
Later LS6 style valve covers (powdercoated black)
Hooker ceramic coated longtube headers
Dual dynomax bullets, dumped at the back of the trans
LS2 Timing chain
LS6 Oil pump
The car was originally a six speed but I swapped out to a built TH350. It still retains the clutch mechanism and pedal for the manual trans.
Does not include manual trans.
Coan 4200 custom spec'd converter. I don't know the STR.
B&M hammer shifter
Steel custom length driveshaft
BMR transmission crossmember (powdercoated red)
The rearend is a stock GM 10 bolt with 3.42:1 gears.
For an extra $1500.00 - A BRAND NEW Strange GM 12 bolt will come with the car. It is narrowed 3" each side, spooled, 33 spline axles, 5/8" lugs, and has an LPW Ultimate aluminum cover with adjustments for loading the main caps.
QA1 coil overs on the front with 275lb. springs
Spohn adjustable torque arm (powdercoated red)
Spohn adjustable cross member brace (powdercoated red)
BMR transmission crossmember (powdercoated red)
Spohn adjustable panhard bar (powdercoated red)\
UMI Performance subframe connectors (painted red)
UMI Performance adjustable lower control arms (powdercoated red)
Softer than stock rear springs (from a V6 car)
Factory rear shocks
Factory rear sway bar
Front sway bar removed (no, I don't have it anymore)
Weight removed and no, I don't have any of this stuff anymore:
Front sway bar
Sound system (head unit, speakers)
Heat, to include all ducting and heater controls
AC unit, to include the AC condenser, AC unit on the firewall, and all controls
Power steering system
Traction control system
Spare tire and jack
Front bumper support
Rear bumper support
Front turn signals
Front inner bumpers have material removed
Misc. mods are as follows:
Adj. brake proportioning valve
Nitto 555R rear tires with approx. 60% tread left
Front tires have approx. 80% tread
The only trades (and of course cash to even up the trade, either from my side or yours) I will consider are:
950 Super Enduro
It is obviously missing a lot of stuff. On one hand it's light. On the other hand it has no options anymore.
Slight oil leak, I believe it's the rear main.
There is a few (less than 5) quarter sized spots on the paint where the clear is looking cruddy.
The paint is about 70% gone on the back bumper where someone ran into me. The bumper brace was out so the bumper popped in and then back out. The bumper is still good, it just needs paint.
The right front fender well has this big hole (about 1.5" in diameter) from the previous owner.
It's missing the coolant over flow tank. When it gets hot, it just bleeds off the excess coolant to the ground.
It needs a battery tie down.
|10-26-2012, 03:14 PM||#9755|
Stop ruining my vacation
Joined: Jul 2003
Location: Denver, CO
Macbook Pro 15" $500
I'm selling my Macbook Pro 15" for $500. This computer is great and works without flaw. Intel 2.4 Ghz Core 2 Duo, 3 GB RAM. The battery is in great shape and holds a charge without issue. The mag safe power adapter is new, and is the updated style, not prone to the issues of the previous generation of power cables.
I've just wiped the hard drive and installed a fresh install of OSX 10.6.8.
The machine does have some scuffs on it from normal use and a ding in the corner (show in the pictures below, does not affect use of the video port at all) There is a small mark on the screen about as big as your pinky finger nail, I documented it well in the pictures below. You really have to be looking for it to see it.
Small ding on the corner
Small oddity in the LCD screen
It's almost impossible to see here
2010 KTM 530 Six Days
|10-26-2012, 05:12 PM||#9756|
Joined: Dec 2010
Location: The 719, Yo.
I've got a couple of Bronco's tickets for sale....
Bronco's vs. New Orleans Saints
Parking pass included - Lot M
Seats are 3rd level - end zone
$150.00 cash for two tickets plus parking pass ($190.00 face value for tickets and parking pass).
pm if interested
Moto since 2011, DR350
MTB since 1991, Full-Rigid Steel 1x8
|10-26-2012, 06:11 PM||#9757|
Joined: Mar 2009
***SOLD to DirtyDR***
Go Broncos! And a bump...
ginslung screwed with this post 10-28-2012 at 05:09 PM Reason: More details
|10-27-2012, 08:06 AM||#9758|
Joined: Feb 2003
06 Ural Patrol
03 R1150 GS Sport/ Friendship II
99 Rokon Ranger
71 Rokon RT140
Hack'n the TLH
Proud Member of the Patrol Patrol
|10-27-2012, 08:41 AM||#9759|
I know that shortcut
Joined: Aug 2004
Location: Eastern UT, land of no traffic lights
04 Ducati 999S, 12 Versys, 08 Can-Am Spyder-SOLD, thank God, , 93 ST1100ABS 132K, 99 ST1100ABS project cafe racer, 93 KLR650, 04 XR650R street legal, 04 CRF500R street legal, 98 KTM 620 Supermoto street legal-SOLD at the suggestion of Honolulu PD, 04 DRZ400S, 82 Turbo Seca (x2), -placed in a good home, 04, ~78 Yambulzukisaki hybrid, and oh so many others
|10-27-2012, 05:03 PM||#9760|
Joined: Oct 2008
Location: Colorado Springs, Colorado
Looking for YZ250
I am looking for a YZ 250 two stroke. Looking to stay 2003 and newer (Might be willing to pay more for 05 and newer) Can be well used as long as it has been cared for regularly. Upgrades that would be great are: flywheel weight, 18in rear wheel, v force reeds. Does not have to have all these by any means but it would help. Don't really want to put a price range on because it changes for every machine and condition but defiantly want to stay under $3,000 if it needs work price needs to reflect it.
Let me know what you have,
1998 KLR650 (Road Warrior)
1997 XR 400 Sadly For Sale
2002 WR 426
|10-27-2012, 05:04 PM||#9761|
Motorcycles are therapy
Joined: Oct 2006
I have the possibility of acquiring an enclosed trailer but the open trailer has to go first.
It's in locked storage ATM but it's in 8/10 condition with upgraded LED tail lamps and wiring.
Super useful. I welded in a 6' track of L-track on the centerline so I can strap down 2 bikes side by side. Includes 4 ramps that can load from the back or side. Super useful for ATV's and Motorcycles.
Model : A212 ATV trailer - 2002 year model.
• 1-3000# Rubber torsion axle - No brakes - Easy lube hubs
• Aluminum fenders
• Extruded aluminum floor
• 6" Front retaining bumper
• A-Framed aluminum tongue, 48" long with 2" coupler
• safety chains
• Swivel tongue jack, 800# capacity
• 2) Rear ramps (12" x 41"), 2) Front ramps (12" x 69"), optional ATV Ramp
• 8) Tie-down loops + center E-track - will include 4 tie down clips for track.
• Overall width = 85"
• Overall length = 195"
• Length between fenders = 62 1/2"
I've pulled 2 bikes easily with a Honda pilot. Easy to push around the yard empty.
Asking $1600 - Have Clear Colorado Title in hand.
Not MY trailer but the exact same model.
portion of track I have welded to trailer floor center line for 6'.
Located in Aurora, CO.
Text or call 70347376nine7 - Jason
Megadeus screwed with this post 10-28-2012 at 03:21 PM
|10-27-2012, 09:20 PM||#9762|
Joined: Jul 2010
Location: Meridian, ID
FYI, that's not E-Track, that's L-Track/Airline Track. Just bought some for the motovan, solid stuff and much less intrusive than the E-Track. If you decide to cut the price in half and can hold the trailer until spring, I'll happily take it off your hands. Something tells me that's not going to happen though . GLWS!
|10-28-2012, 07:40 AM||#9764|
Joined: Apr 2011
Location: N Colorado
AGV Kevlar cargo pants 32x32 worn maybe 6 times $50 ftf $60 shipped
Located in Fort Collins
Used jetboil and pot support no pot included $30 ftf $35 shipped
Well used (probly shoulda washed the bugs off first those are mostly bugs not chips or scratches) Hjc is16 helmet with built in sunscreen XL $40? Won't ship
Icon magnetic tank bag FREE ftf won't shop
Joe Rocket jacket size L has pads and liner. $29.99 OBO won't ship
DID 520 roller chain 110 links brand new. $35 ftf also have a barely used renthal non O ring chain that ill throw in
Garmin 276C w/ TT locking mount for cheap PM for more info
Open to trades on everything listed. Whatcha got?
also if you have a WR250R and need any stock parts let me know I have a pile of them
mpatch screwed with this post 10-28-2012 at 08:20 AM
|10-28-2012, 02:53 PM||#9765|
Joined: Oct 2012
Location: Lakewood Co
I'd be interested in both of these. Any chance you get down towards Golden often? I'll take them both and I'll figure out how to get ahold of them.
|Thread Tools||Search this Thread|