The Toolkit Thread

Wy'east · 11-07-2012, 11:55 PM

The above suggestion are good ideas once everything else is correct. Some type of impact wrench or driver can be useful too. The desired usefulness can also be construed as a measure of how much damage you want to perform on the side of your hand or the fastener you want remove or even the item that the fastener is attached to if you're using the hammer/mallet assisted type - what fun!

11-07-2012, 11:55 PM	#11
Wy'east Dust in the wind... Joined: Sep 2012 Location: Stuck in Levant Oddometer: 117	The above suggestion are good ideas once everything else is correct. Some type of impact wrench or driver can be useful too. The desired usefulness can also be construed as a measure of how much damage you want to perform on the side of your hand or the fastener you want remove or even the item that the fastener is attached to if you're using the hammer/mallet assisted type - what fun! __________________ “ I tell you, we are here on Earth to fart around, and don't let anybody tell you different.” ― Kurt Vonnegut Jr.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode