In need of assistance...

Motomedic · 11-09-2012, 08:51 AM

So, I'm camping near Camden AL, Elm Bluff to be specific, and my 950 has lost 6th gear due to shifting issues. Since I already had it geared down to better deal with my load off-road, this equates to a 60mph top speed.

A little backstory- I'm on a extended 4 corners tour, hitting all the major corners of our fine country with a few detours along the way. I just visited the Barber museum, and am now heading for New Orleans. I sold everything to make this happen, been on the road since early June and no, I haven't started a RR/blog.

Yesterday, shifting got bit funky, and resulted in a loss of 6th gear. I'm hoping it's the mechanism under the cover behind the clutch, and not related to the drum or forks, as that would require splitting the cases. I'm a mechanic by trade, so the actual work isn't all that big of a deal, but I need a couple things along the way.

So, I need a place to work and live to see this repair through. My needs are simple- a flat spot to throw up the tent and access to a bathroom covers the living arrangements and a flat clean spot to work. Inside would be nice for that part, since it's possible this will require case splitting. I'll need a couple "special" tools too, but that's a secondary bridge to cross. A 46mm socket for the crank nut and a clutch basket holder are the only things I can think of that are not usually in a set of tools at home. I have a couple of the other special tools with me.

If (more like when) parts are required I should be able to order stuff online, but there will be time involved. We are after all talking about a KTM here.

Even if I specify rush shipping and all that, they seem to work at a speed that glaciers would be jealous of when it comes to parts orders.

So anyone want to host a dirty hippie from California for a week to ten days (worst case-scenario, best case being a day or two)? I cook, clean, fix things and am generally a quiet, appreciative guest.

I'm going to cross-post this into Inmates and the next region over, since I'm still kinda mobile and can travel a bit before having to actually stop (fingers crossed). My references here include Parepin, Jettin Jim, LtDan and a few others if necessary.

A reply here pushes to my phone, but reception isn't the greatest at the campground (I'm at a Hardee's in Camden right now) so I might not be able to respond until later, or you can try calling or texting at 707 367 3110.

DirtDabber · 11-09-2012, 10:03 AM

I am in Clayton GA which is the opposite direction from you... but have shop space, and a place to stay. Nannohiccup is in Mobile and may have some more local knowledge of someone that can help that is closer. I will shoot him a PM with a link to this thread.

Nanohicup

iyaoyas98 · 11-09-2012, 01:20 PM

I'm way up in Nashville, but have a spare room and a garage. KTM dealer is about 7 miles away from my door.

Hoping someone chimes in that is a better fit for you.

GaM · 11-09-2012, 01:30 PM

Try a post at this site:

www.bamarides.com

JaxObsessed · 11-09-2012, 01:38 PM

You would get better results if you ask a mod to change your thread name to reflect the area you are in.... You have cast a really wide net.

Good luck, sounds like a fun trip!

nanohiccup · 11-09-2012, 01:51 PM

Pm and text sent

Here to help if needed, abt 3 hrs south of you.
Always looking for good karma to offset ma' dirty sinful past .

ADVMax · 11-10-2012, 07:58 AM

Just got a heads up on this, PM sent.

Shop space and 950 factory special tool board available. Your about 4 hours south of us, if the bike had been cooperative and took a shit at Barber you would have been less than an hour away!

Motomedic · 11-10-2012, 08:28 AM

Thanks to Advmax I'm heading north to his place. Having the tools to take the beast apart is a compelling argument to head back north.

I'll update when I can...

ADVMax · 11-10-2012, 09:13 AM

Keep us posted, ready to do a trailer save if needed. I gave sstewart a heads up that you're headed this way.

Just to keep the culture shock from all us hillbillies as low as possible there will be another inmate originally from California here this evening as well to translate and offer support.

nanohiccup · 11-10-2012, 09:41 AM

Beware of da crab shack, glad yer going somewhere with special tools..

SlowRide13 · 11-10-2012, 12:44 PM

Wow. Y'all rock. I don't even invite my own family over

cbolling · 11-10-2012, 01:12 PM

Cool, glad you found a place to go. Keep this thread updated.

DirtDabber · 11-10-2012, 05:09 PM

Quote:

Originally Posted by SlowRide13

Wow. Y'all rock. I don't even invite my own family over

Suprised they would even show up. Last time I was at your house I left $900 poorer and I did not even make it past the porch.

barnyard · 11-10-2012, 05:12 PM

Quote:

Originally Posted by nanohiccup

Beware of da crab shack, glad yer going somewhere with special tools..

Special tools????

Does that mean they're drinking out of glasses????

DirtDabber · 11-10-2012, 05:13 PM

Quote:

Originally Posted by barnyard

Special tools????

Does that mean they're drinking out of glasses????

I think it means a funnel...

11-09-2012, 08:51 AM	#1
Motomedic ^OP Beastly Adventurer Joined: Oct 2004 Location: Spokane Oddometer: 1,827	In need of assistance... So, I'm camping near Camden AL, Elm Bluff to be specific, and my 950 has lost 6th gear due to shifting issues. Since I already had it geared down to better deal with my load off-road, this equates to a 60mph top speed. A little backstory- I'm on a extended 4 corners tour, hitting all the major corners of our fine country with a few detours along the way. I just visited the Barber museum, and am now heading for New Orleans. I sold everything to make this happen, been on the road since early June and no, I haven't started a RR/blog. Yesterday, shifting got bit funky, and resulted in a loss of 6th gear. I'm hoping it's the mechanism under the cover behind the clutch, and not related to the drum or forks, as that would require splitting the cases. I'm a mechanic by trade, so the actual work isn't all that big of a deal, but I need a couple things along the way. So, I need a place to work and live to see this repair through. My needs are simple- a flat spot to throw up the tent and access to a bathroom covers the living arrangements and a flat clean spot to work. Inside would be nice for that part, since it's possible this will require case splitting. I'll need a couple "special" tools too, but that's a secondary bridge to cross. A 46mm socket for the crank nut and a clutch basket holder are the only things I can think of that are not usually in a set of tools at home. I have a couple of the other special tools with me. If (more like when) parts are required I should be able to order stuff online, but there will be time involved. We are after all talking about a KTM here. Even if I specify rush shipping and all that, they seem to work at a speed that glaciers would be jealous of when it comes to parts orders. So anyone want to host a dirty hippie from California for a week to ten days (worst case-scenario, best case being a day or two)? I cook, clean, fix things and am generally a quiet, appreciative guest. I'm going to cross-post this into Inmates and the next region over, since I'm still kinda mobile and can travel a bit before having to actually stop (fingers crossed). My references here include Parepin, Jettin Jim, LtDan and a few others if necessary. A reply here pushes to my phone, but reception isn't the greatest at the campground (I'm at a Hardee's in Camden right now) so I might not be able to respond until later, or you can try calling or texting at 707 367 3110. __________________ Feike Said James to Red Molly, Now Nortons and Greeves and Indians won't do- they don't have a soul like a Vincent '52

11-09-2012, 10:03 AM	#2
DirtDabber cultural illiterate Joined: Jul 2007 Location: Way North GA Oddometer: 6,398	I am in Clayton GA which is the opposite direction from you... but have shop space, and a place to stay. Nannohiccup is in Mobile and may have some more local knowledge of someone that can help that is closer. I will shoot him a PM with a link to this thread. Nanohicup __________________ . I wonder where that road goes? DirtDabber screwed with this post 11-09-2012 at 10:13 AM

11-10-2012, 07:58 AM	#7
ADVMax Sporting Foole Joined: Oct 2006 Location: Sometimes I'm here, sometimes I'm there. Oddometer: 27,582	Just got a heads up on this, PM sent. Shop space and 950 factory special tool board available. Your about 4 hours south of us, if the bike had been cooperative and took a shit at Barber you would have been less than an hour away! __________________ There is absolutely NO EXCUSE for what I'm about to do! The Second Amendment - it ain't about duck hunting. You heatherns needs some churchin up - http://www.landoverbaptist.org/

11-10-2012, 08:28 AM	#8
Motomedic ^OP Beastly Adventurer Joined: Oct 2004 Location: Spokane Oddometer: 1,827	Thanks to Advmax I'm heading north to his place. Having the tools to take the beast apart is a compelling argument to head back north. I'll update when I can... __________________ Feike Said James to Red Molly, Now Nortons and Greeves and Indians won't do- they don't have a soul like a Vincent '52

11-10-2012, 09:13 AM	#9
ADVMax Sporting Foole Joined: Oct 2006 Location: Sometimes I'm here, sometimes I'm there. Oddometer: 27,582	Keep us posted, ready to do a trailer save if needed. I gave sstewart a heads up that you're headed this way. Just to keep the culture shock from all us hillbillies as low as possible there will be another inmate originally from California here this evening as well to translate and offer support. __________________ There is absolutely NO EXCUSE for what I'm about to do! The Second Amendment - it ain't about duck hunting. You heatherns needs some churchin up - http://www.landoverbaptist.org/

11-09-2012, 01:20 PM	#3
iyaoyas98 Bored Silly Joined: Apr 2006 Location: Smyrna, TN Oddometer: 3,374	I'm way up in Nashville, but have a spare room and a garage. KTM dealer is about 7 miles away from my door. Hoping someone chimes in that is a better fit for you.

11-09-2012, 01:30 PM	#4
GaM Beastly Adventurer Joined: Oct 2004 Oddometer: 1,876	Try a post at this site: www.bamarides.com

11-09-2012, 01:51 PM	#6
nanohiccup in time Joined: Jun 2007 Location: Mobile, Al Oddometer: 588	Pm and text sent Here to help if needed, abt 3 hrs south of you. Always looking for good karma to offset ma' dirty sinful past .

11-10-2012, 09:41 AM	#10
nanohiccup in time Joined: Jun 2007 Location: Mobile, Al Oddometer: 588	Beware of da crab shack, glad yer going somewhere with special tools..

11-10-2012, 12:44 PM	#11
SlowRide13 Veteran n00b Joined: Aug 2009 Location: Lakemont, Georgia, USA Oddometer: 1,333	Wow. Y'all rock. I don't even invite my own family over __________________ F800GS Grin Machine KTM690E Grrr Machine XR600R Oakey Mtn in the mud http://www.youtube.com/watch?v=bzoU2NpkaoA www.hoofrehab.com

11-10-2012, 01:12 PM	#12
cbolling Here...Hold my Beer. Joined: Mar 2008 Location: Greenville, SC Oddometer: 2,369	Cool, glad you found a place to go. Keep this thread updated. __________________ 2011 Kawasaki Versys http://www.advrider.com/forums/showthread.php?t=661436

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode