The Toolkit Thread

[Rotten Ronnie]

Originally Posted by LoneStar

Thx Hacha and Jesus - glad to hear the little ratchet is so tough. Never used such a small one so have no reference as to durability and haven't used the quick bits other than for screwdrivers. Plan on using the heck out the little guy over the next few mos on the GS

I've used it to drop the forks on my KLR, but you'll need your gloves on.

I'd add a 1/4" drive extension bar, 3 to 6" along with a bit holder so you have more reach as a screwdriver.

Gear Wrench makes a set that they sell at the Canadian version of Lowes, but you'll need to replace all the sae hex with metric.