ADVrider

Go Back   ADVrider > Gear > Vendors
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 11-05-2012, 05:44 PM   #1
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,287
Woody's 21" front fender solution for R1200GS/GSAs

finally figured something out using an OEM front fender:
looks like this:

side view of rear half with relief for the brake lines:




side view of what it all looks like assembled



Now,,,ya'll could:
1,, send yours in and we'll modify it for you
and send you a installation kit


2,,we could build a total kit for you all

3,,you could cruise by here and we'll take care of it

4,,you could look at all the pics and modify it yourself

now the ball is in your court

woody
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is online now   Reply With Quote
Old 11-06-2012, 02:40 PM   #2
blaster11
Fidus et Audax
 
blaster11's Avatar
 
Joined: May 2008
Location: Southern Maryland
Oddometer: 6,207
Interesting, I wish I would have had this earlier this year!
__________________
Bruce
“Great minds discuss ideas, average minds discuss events, small minds discuss people. ” H. Cameron
IBA # 46755
Adventures of Blaster and Dorito
blaster11 is offline   Reply With Quote
Old 12-20-2012, 10:32 PM   #3
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,287
new version/protype II//lateral bi-section

so we tried Prototype I and it has proven itself for hundreds of dirt /mud miles,,,so we wanted an even simpler way of dissecting/bi-secting the front fender using the location data from the type I...
slid together perfectly,,will have the custom brackets dialed in by week end

this simple mod will require no serious hand tools,,,our complete kit can make it a 30 minute swap,,no need for any other mods and /or components..stay tuned...

took some pics and measurements ,,this mod raises front fender 2'' higher than oem mounting position...

here's pic of OEM versus WWW Rx ,,,see lower oem position and a full 2''elevation change:

willkeep you all posted..

woody



__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W

woody's wheel works screwed with this post 12-21-2012 at 10:04 AM
woody's wheel works is online now   Reply With Quote
Old 12-21-2012, 08:42 AM   #4
blaster11
Fidus et Audax
 
blaster11's Avatar
 
Joined: May 2008
Location: Southern Maryland
Oddometer: 6,207
Getting tossed on the ground because my front wheel caked with mud and locked up was no fun!
__________________
Bruce
“Great minds discuss ideas, average minds discuss events, small minds discuss people. ” H. Cameron
IBA # 46755
Adventures of Blaster and Dorito
blaster11 is offline   Reply With Quote
Old 12-21-2012, 10:12 AM   #5
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,287
faceplants and what not,,,

Quote:
Originally Posted by blaster11 View Post
Getting tossed on the ground because my front wheel caked with mud and locked up was no fun!
i feel for you,,,and test driving a high fendered MX-500 yamaha i too got tossed/high sided when our Colorado Gumbo made short shrift of 20'' of clearance between top of tire and underside of fender

Truth is ,,we have to pay attention to the limitations of the equipment we ride and the conditions we plan on encountering...kinda a common sense sort of thing

w
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is online now   Reply With Quote
Old 12-21-2012, 10:20 AM   #6
blaster11
Fidus et Audax
 
blaster11's Avatar
 
Joined: May 2008
Location: Southern Maryland
Oddometer: 6,207
Quote:
Originally Posted by woody's wheel works View Post
Truth is ,,we have to pay attention to the limitations of the equipment we ride and the conditions we plan on encountering...kinda a common sense sort of thing

w
Until you are 2k miles from home and someone changes the recipe on mud.
__________________
Bruce
“Great minds discuss ideas, average minds discuss events, small minds discuss people. ” H. Cameron
IBA # 46755
Adventures of Blaster and Dorito
blaster11 is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 10:07 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014