FrankenStein and other Freaks- Motorcycle Monsters - Page 3

eternalRider · 09-28-2012, 09:20 PM

does this count its a 03 ninja 250 with 11 in ground clearance. it was not finished but it was my daily driver so much fun. it got stolen

sailah · 09-29-2012, 07:28 AM

Quote:

Originally Posted by Motomochila

I need a place to store the battery,

How about a Li Ion right on top of the transmission clocked sideways under the carb? They are tiny and super light

Motomochila · 09-29-2012, 02:02 PM

Quote:

Originally Posted by sailah

How about a Li Ion right on top of the transmission clocked sideways under the carb? They are tiny and super light

Thought about that but I'm adding a starter off a euro 650R and it fills that space, so a 450X tail with a battery box should handle a Shorai plus all the ignition doo-dads.

Motomochila · 09-29-2012, 02:04 PM

Quote:

Originally Posted by eternalRider

does this count its a 03 ninja 250 with 11 in ground clearance. it was not finished but it was my daily driver so much fun. it got stolen

Anything counts when you steal parts from bike to make your monster. Did you ride it in the dirt? Pics?

Motomochila · 12-14-2012, 11:33 AM

So..another of my little freaks gets closer to completion. 2006 XR 650L conversion to hard tail Super Single cruiser. The dummy motor is installed for pipe and other fitments, shocks for the seat, copper fenders, and tank cut and welded from a Honda Rebel. And yep, they're real copper from 7 Metal West
.

Headlight off an old Dodge or Chrysler...

Copper Fenders and Copper shocks

No work over the Xmas holidays but it should be ready to install the motor by first week in January.....if my engine builder gets off his Keester.

JagLite · 12-14-2012, 09:16 PM

Looking fantastic!

CoyoteCowboy · 12-16-2012, 08:28 AM

Nice work! What other goodies ya got hiding in there? I spy an A-bone with a blown flattie and a Tony Nancy carb topper? Chev p/u on the right and can't really tell whats in the back, but it looks to be sporting a blower motor as well!

Scootern29 · 12-16-2012, 06:23 PM

I built this especially for the CZ World MX Championships in the early 90's. Husky chassis with a 380 CZ motor stuffed in it. Custom pipe and it kicked ass.

Uploaded with ImageShack.us

Motomochila · 12-16-2012, 06:30 PM

Quote:

Originally Posted by CoyoteCowboy

Nice work! What other goodies ya got hiding in there? I spy an A-bone with a blown flattie and a Tony Nancy carb topper? Chev p/u on the right and can't really tell whats in the back, but it looks to be sporting a blower motor as well!

I walk by them every day and do not see anything but scrap metal. Sorry, I'm a motohead. Cages to me are like that fat girl in the marching band back in high school. Nobody ever pays attention.

But there are people willing to pay for that stuff too. Both the rods, and the girl. Whatever you fancy, and pocketbook, we can make it.

bk brkr baker · 12-21-2012, 08:03 AM

Not mine , it's for sale in Tucson. I'd guess it qualifies as a freak.

YZman · 12-23-2012, 05:20 AM

Not mine but a few of my buddys frankenbikes

CR250/RD350 hybrid

Custom 650 Ninja

ZX1000 on Nos custom....everything

bk brkr baker · 12-23-2012, 06:02 AM

Hillclimb bikes lean toward freaky.

DRjoe · 12-23-2012, 03:05 PM

Hell yea that's some freaky bikes.

SloMo228 · 01-01-2013, 09:11 AM

Quote:

Originally Posted by Motomochila

So..another of my little freaks gets closer to completion. 2006 XR 650L conversion to hard tail Super Single cruiser. The dummy motor is installed for pipe and other fitments, shocks for the seat, copper fenders, and tank cut and welded from a Honda Rebel. And yep, they're real copper from 7 Metal West
.

Headlight off an old Dodge or Chrysler...

Copper Fenders and Copper shocks

No work over the Xmas holidays but it should be ready to install the motor by first week in January.....if my engine builder gets off his Keester.

I love those fenders! The bike is looking really good.

Motomochila · 01-03-2013, 01:35 PM

Quote:

Originally Posted by bk brkr baker

Hillclimb bikes lean toward freaky.

Steroids for sure....and trying that ONCE at the Billings hill climb, I'd say the riders are far more freakier than the bikes they ride. Their stones are bigger than watermelons. Did a modified run with a freak like rose and pissed myself.

09-28-2012, 09:20 PM	#31
eternalRider Ride to Live! Joined: Nov 2010 Location: santa cruz ca Oddometer: 57	dirt ninja does this count its a 03 ninja 250 with 11 in ground clearance. it was not finished but it was my daily driver so much fun. it got stolen

12-14-2012, 11:33 AM	#35
Motomochila ^OP Mechanically Inept Joined: Sep 2007 Location: N 34 22.573' W 118 34.328' Jes North of LA a few. Oddometer: 494	Barnsdorffer Special Updates So..another of my little freaks gets closer to completion. 2006 XR 650L conversion to hard tail Super Single cruiser. The dummy motor is installed for pipe and other fitments, shocks for the seat, copper fenders, and tank cut and welded from a Honda Rebel. And yep, they're real copper from 7 Metal West . Headlight off an old Dodge or Chrysler... Copper Fenders and Copper shocks No work over the Xmas holidays but it should be ready to install the motor by first week in January.....if my engine builder gets off his Keester. __________________ KTM- Brand spankin' new in 2013- a fresh outta the box 2008 EXC450R, 2009 690 R Adventure Conversion BMW- 2012 GTL 1600-sweet, 2011 R1200GS Adventure Honda- 2000 XR650R- 2006 XR650L- Yamaha- 1972 XS750 Tracker, 1971 RC5- BSA- 1945 M20, The newest member to my stable Kawasaki-NOT Are you kidding

12-14-2012, 09:16 PM	#36
JagLite Studly Adventurer Joined: Jun 2010 Location: Anchorage Alaska Oddometer: 608	Copperhead Looking fantastic! __________________ Attitude ~ The difference between Ordeal and Adventure James

12-16-2012, 08:28 AM	#37
CoyoteCowboy Easily Distracted Joined: Jun 2005 Location: Medicine Lodge, Ks (Gyp Hills) Oddometer: 244	Nice work! What other goodies ya got hiding in there? I spy an A-bone with a blown flattie and a Tony Nancy carb topper? Chev p/u on the right and can't really tell whats in the back, but it looks to be sporting a blower motor as well! __________________ "East were the Dead kings and the remembered sepulchres; West was the grass." Archibald MacLeish

12-21-2012, 08:03 AM	#40
bk brkr baker Beastly Adventurer Joined: Jul 2006 Location: The Bluegrass Oddometer: 4,160	Not mine , it's for sale in Tucson. I'd guess it qualifies as a freak. __________________ RR's Catnip Hill to Peoria ___Loopin' Seattle to WestFest It started with some beers __1500 miles to the Dentist Skeedaddle to Seattle______ A 30 year old on a Three Flags Run

12-16-2012, 06:23 PM	#38
Scootern29 Gnarly Adventurer Joined: Sep 2012 Location: In the hot, hot, dezert Oddometer: 237	I built this especially for the CZ World MX Championships in the early 90's. Husky chassis with a 380 CZ motor stuffed in it. Custom pipe and it kicked ass. Uploaded with ImageShack.us

12-23-2012, 05:20 AM	#41
YZman Bouncing off Trees Joined: May 2006 Location: Meeeechigan Oddometer: 1,100	Not mine but a few of my buddys frankenbikes CR250/RD350 hybrid Custom 650 Ninja ZX1000 on Nos custom....everything

12-23-2012, 06:02 AM	#42
bk brkr baker Beastly Adventurer Joined: Jul 2006 Location: The Bluegrass Oddometer: 4,160	Hillclimb bikes lean toward freaky. __________________ RR's Catnip Hill to Peoria ___Loopin' Seattle to WestFest It started with some beers __1500 miles to the Dentist Skeedaddle to Seattle______ A 30 year old on a Three Flags Run

12-23-2012, 03:05 PM	#43
DRjoe Beastly Adventurer Joined: Sep 2007 Location: Sunshine coast qld Oddometer: 4,260	Hell yea that's some freaky bikes.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode