Go Back   ADVrider > Bikes > Orange Crush > Crazy-Awesome almost Dakar racers (950/990cc)
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 01-09-2013, 05:04 AM   #1
Jdeks OP
Joined: Aug 2009
Oddometer: 1,022
Help! Drill/modify an oil filter for a pressure gauge sender?

Hi all,

I'm looking to fit an oil pressure gauge to my 950. After a chat with a KTM contact of mine, I arranged an order of a special oil filter cover with a sender line build in, apparently used on the rally bikes. Real neat piece of kit, except as you can see below (new cover on the left, stock on the right), the inside of the cover has a proud section of tube that looks like it should slot into an oil filter....except as you can see, the 950 normal filter has no hole. As such, the cover won't bolt on.

My hairbrained scheme is:

  • salvage the rubber sealing ring from the old filter (which fits snugly onto the internal pipe from the new cover),
  • drill a hole in the sealed metal end of the new filter
  • install the sealing ring on that hole (fluid-tight with silicone sealant or something), making a 'straight-through passage to the sender line, allowing the new cover to fit on and 'plug in' to the oil system.
Assuming I seal the rubber ring properly, I can't see how this allowing dirty oil to mix with clean, and being right after the pump, it should give a good pressure reading, yes?

But if this is a terrible idea and someone can see any impending disasters (dashboard oil volcanoes?) with this plan, I'm all ears.

And thankyou in advance, but I do know about the other oil sender fitting locations, but I've decided to go with this one.
Jdeks is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 03:43 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015