Honda XR650L XR600 NX650 Oil Cooler from GSMark

[techforlife]

Cooler bling.........i love mine,takes a beating and looks cool as hell..

Hey Mark.when are you gonna make an alooy chain guad,,mine is toast


B

[GSMark]

Hi guys and gals,
I FINALLY have all of the parts that I need to make complete kits.

Thank you for your patience on this. I have been going crazy finding the correct parts to finish the kits.
This was a good lesson for me. I will have to re-think the way to find parts.
I am still using OEM Honda rubber bushings for the guard and rubber isolated oil cooler.
Well... It seems that I drained American Honda from all of these rubber parts. I received enough to make a batch of kits.
No fear, I found another source of the rubber parts that I need to make the kits in the future.

I am very sorry for the delay in providing my oil cooler kits.

Please remember that I do not do this for a living. I just do this to help inmates cool down the Big Red Pigs.

The price is still the same: see the first page.

Cheers

Mark

[rc10driver]

Mark, will it work with the Acerb 5.8 gallon gas tank installed, just wondering

[GSMark]

Originally Posted by rc10driver

Mark, will it work with the Acerb 5.8 gallon gas tank installed, just wondering

Should not be a problem.
I have not found a tank yet that offered any problems.

Thanks for looking at my work.

Cheers,
Mark

[formulals1]

Originally Posted by rc10driver

Mark, will it work with the Acerb 5.8 gallon gas tank installed, just wondering

Works with my 5.8 just fine.

[XStatic450]

Received kit today!!! Fast shipping.....awesome!!! Thanks Mark!!!!!

[JD_Mckoy]

Hi Mark, I salute you on your work and craftsmanship and fellow inmates on their feedback and imput I'm new here. I’m very much interested in making a purchase but before I do can you provide the temperature drop with this setup.
Thanks

[GSMark]

Originally Posted by JD_Mckoy

Hi Mark, I salute you on your work and craftsmanship and fellow inmates on their feedback and imput I'm new here. I’m very much interested in making a purchase but before I do can you provide the temperature drop with this setup.
Thanks

Hello JD,
Thank you for the compliments on my work.

I can give you some quotes from some of the inmates on the performance of the kit.

"This oil cooler works well. Before the cooler, my bike would see 225 to 240 degrees regularly, the higher temps, especially at freeway speeds of 60 to 70 mph. I have the XR'sOnly oil temperature dipstick. Riding around on Saturday, it never got above 210! Sunday was a bit cooler. A fellow inmate and I rode out to Hacienda Santa Veronica which is just south and east of Tecate, and is probably at an elevation of 4 to 5000 feet. Much colder up there. I'm guessing the high there was in the 40's. The bike never got above 200. There were even times where we were running at 55 mph and the oil temp was sitting at 175."

"Definitely keeps the temp down. After checkin several times for drips and errors I ran her pretty hard for ~ 50 mi and she pushed 200 but came right back down once I relaxed the throttle and ran at a responsible pace."

"hey mark I've had the cooler on for a few weeks now and it works great!
 Ambient air temps between 70 and 100 oil temps run 180 to 220 even riding hard or at slow speeds..."

I hope this helps,

Cheers,
Mark

[Rass]

First things first: Have a extra good 2013.
Remember me? Sebastián Corrales, from chile.

I want an upgrade kit.
I'll pay and you will have to send it like a "COMMERCIAL SAMPLE or GIFT". This is important to avoid customs exagerated delays.

And I have a question. Due to oil cooler desing is it possible that it builds up bottom dirt?

I hope your comments.
CHAUUU!!

[JD_Mckoy]

Ok! the info you provided was very helpfull.
I'll go with the following set-up XR650L HD 'bare aluminum'
I reside in Jamaica so let me know what it would cost for shipping it here. I would mind expidite shipping at a low rtae .
as soon as I receive this info PM will be sent.
Also duty here is high 25% of CFI. So it would be well apreciated if invoice value reflect anything les than the actual sales cost say 60%

[GSMark]

Originally Posted by Rass

First things first: Have a extra good 2013.
Remember me? Sebastián Corrales, from chile.

I want an upgrade kit.
I'll pay and you will have to send it like a "COMMERCIAL SAMPLE or GIFT". This is important to avoid customs exagerated delays.

And I have a question. Due to oil cooler desing is it possible that it builds up bottom dirt?

I hope your comments.
CHAUUU!!

Hello Sebastián,
I remember you well. My South American customer. I hope you are well and staying "cool".
Gee..."COMMERCIAL SAMPLE or GIFT" . Well, I never! That would be like... lying.

Send me an email at:
mark@mega.net
we will work out the details.

Cheers,
Mark

[GSMark]

Originally Posted by JD_Mckoy

Ok! the info you provided was very helpfull.
I'll go with the following set-up XR650L HD 'bare aluminum'
I reside in Jamaica so let me know what it would cost for shipping it here. I would mind expidite shipping at a low rtae .
as soon as I receive this info PM will be sent.
Also duty here is high 25% of CFI. So it would be well apreciated if invoice value reflect anything les than the actual sales cost say 60%

Hello JD,
I received and replied to your email that you sent me with the above request.

I am so sorry for the delay.
Cheers,
Mark

[Hotmamaandme]

Mark, any possibility of making a mounting bracket or complete cooler kit for the DR350? I know there are more than a few that would buy them. The oil cooler was an option for the 350 but they are pretty rare to find a OEM kit. I will commit to 2 oil cooler kits or even mounts.

Thanks Cory

[Greg Bender]

Originally Posted by Hotmamaandme

Mark, any possibility of making a mounting bracket or complete cooler kit for the DR350? I know there are more than a few that would buy them. The oil cooler was an option for the 350 but they are pretty rare to find a OEM kit. I will commit to 2 oil cooler kits or even mounts.

Thanks Cory

And since Cory brought it up, I'll admit that I've been thinking about contacting you about this idea for some time. I'm in Cave Creek and could easily drop by with my DR350 for a quick "feasibility study".

Regards,

Gregory Bender

[Hotmamaandme]

Originally Posted by Greg Bender

And since Cory brought it up, I'll admit that I've been thinking about contacting you about this idea for some time. I'm in Cave Creek and could easily drop by with my DR350 for a quick "feasibility study".

Regards,

Gregory Bender

Perfect Greg!