What did you do with your Trials Bike today? - Page 103

andrewgore · 01-15-2013, 06:25 AM

Quote:

Originally Posted by lineaway

Sorry to hear that. I have heard of it, but first time that I saw it! Thanks for the pics. Well at least your bike will be fresh this spring. Have you checked the jetting just to be sure?

I'll be verifying jetting when I clean & rebuild the carb. Only benefit of this happening is that the engine should be good for quite some time after this & I get to give the bike a really good cleaning & refreshing. It'll also give me a chance to replace some of the crapped out hardware on the thing. I plan to make the hardware choice more consistent than OEM too. Why GasGas chose to use about 50 different styles of fasteners on this thing boggles me.

Andrew

brewtus · 01-15-2013, 06:32 AM

Quote:

Originally Posted by GrayEagleRider

What kind of oil are you putting in it?

I've been running Honda Pro transmission oil (CR/CRF stuff) simply because I have several quarts of it lying around. Looks, smells, and quite possibly tastes just like ATF. Seems to work well, and I change it about twice a year.

andrewgore · 01-16-2013, 11:46 AM

Sent out my cylinder to Paynes Cycle Center. They'll be sending it out to get bored & plated to match the readily available 280cc piston. Saves quite a bit of money & I get 8cc more out of the deal.

Also ordering up all new Stainless Steel hardware for the bike. Far too much of the hardware on the bike was too dirty & messed up heads (looks like someone used SAE wrenches in Metric situations).

Andrew

broncobowsher · 01-17-2013, 06:00 PM

Went out for a pratice ride in the backyard after work today. First time since I got the CTI brace.
Starting off the brace was VERY noticable, especially while trying to start the bike. Finally got the bike started. Started putzing around the yard, hard turns lock to lock weaving around trees, logs, assorted junk. Then over some of the stuff.

A few things I quickly realized I forgot.
How to ride, clutch control, riding smooth, how to do a simple hop and the knee brace. I really like that last one. I rode around for just a short time and went and put the bike away before it was too dark. Got off the bike and then remember I had the brace on. That was

! If I can forget that it is there in such a short time the first time I wore it then it must fit pretty good.

Now to work on those skills that all went away over the past half year and knee surgery. I think by the time I get back up to speed the blown ACL and resulting surgery will be a year long speed bump. More peg time, watching the training DVD many more times, get the basics down again.

andrewgore · 01-19-2013, 07:52 PM

Cleaned every part on the bike today (ultrasonic cleaner is a godsend). Pressure washed the frame, swingarm, etc. Repacked all the linkage and swingarm bearings. Replaced wheel bearings front\rear. Wheels awaiting fresh tires this week. Removed a stuck rear caliper bolt (holds the pads in). Began reassembly of the bike. It'll just need the cylinder tossed in when it arrives.

Working on replacing the fork seals as well. They are pretty well stuck in the aluminum housing. I was able to find a place online where I could score seals for 4$ a piece. I should be good for awhile.

Andrew

2whlrcr · 01-20-2013, 05:34 AM

I rode for 15 minutes yesterday. It was 50F out. This morning it's -15F below wind chill.

Gordy · 01-20-2013, 05:44 AM

Quote:

Originally Posted by 2whlrcr

I rode for 15 minutes yesterday. It was 50F out. This morning it's -15F below wind chill.

Sorry about that.

We should have a good turn out today for some practice. Suppose be in the low 50s.
That will feel like 70 compared to the last two weeks deep freeze that settled in here.

Gham · 01-20-2013, 06:47 AM

Quote:

Originally Posted by broncobowsher

Went out for a pratice ride in the backyard after work today. First time since I got the CTI brace.
Starting off the brace was VERY noticable, especially while trying to start the bike. Finally got the bike started. Started putzing around the yard, hard turns lock to lock weaving around trees, logs, assorted junk. Then over some of the stuff.

A few things I quickly realized I forgot.
How to ride, clutch control, riding smooth, how to do a simple hop and the knee brace. I really like that last one. I rode around for just a short time and went and put the bike away before it was too dark. Got off the bike and then remember I had the brace on. That was

! If I can forget that it is there in such a short time the first time I wore it then it must fit pretty good.

Now to work on those skills that all went away over the past half year and knee surgery. I think by the time I get back up to speed the blown ACL and resulting surgery will be a year long speed bump. More peg time, watching the training DVD many more times, get the basics down again.

Glad to hear your on the road to recovery,mind if I ask what training video your referring to? I could go for some winter reading/viewing and I have a birthday coming up.My wife never knows what to get me so I usually just grab something small (tires/fork springs ect...) for myself and we're both happy.

NMTrailboss · 01-20-2013, 06:56 AM

Quote:

Originally Posted by Gham

Glad to hear your on the road to recovery,mind if I ask what training video your referring to? I could go for some winter reading/viewing and I have a birthday coming up.My wife never knows what to get me so I usually just grab something small (tires/fork springs ect...) for myself and we're both happy.

https://secure.rypusa.com/prodpage.c...=84&startrow=1

and

https://secure.rypusa.com/prodpage.c...323&startrow=1

Gham · 01-20-2013, 09:16 AM

Quote:

Originally Posted by NMTrailboss

https://secure.rypusa.com/prodpage.c...=84&startrow=1

and

https://secure.rypusa.com/prodpage.c...323&startrow=1

Thank you!

DrKayak · 01-20-2013, 09:40 AM

Took a full year of searching to find this 2006 Rev3 for $2,500.

Old and new ----

I got most of the service done on the new one. Trying to decide if I should leave the ATF in it. The clutch is actualy smoother on my Techno with Rotella 6T in the gear box.

joe cool · 01-20-2013, 01:58 PM

Very nice looking Beta! I like to use Maxima mlt 75 w oil In my Beta.

broncobowsher · 01-20-2013, 08:44 PM

Quote:

Originally Posted by NMTrailboss

https://secure.rypusa.com/prodpage.c...=84&startrow=1

Correct, this is the one I have. More then advanced enough for what I will be able to do for the next couple of years.
I don't think it has been out of the DVD player in over a year.

andrewgore · 01-24-2013, 06:29 AM

Brakes cleaned and bled, new tires spooned on. Basically just waiting on piston\cylinder to come in, and we'll be back in action. The bike already feels 100x better than before.

Andrew

AteamNM · 01-24-2013, 08:49 AM

Those Betas are pretty. The blue one seems to continue to hold up years later. My neighbor Dean has the same Beta and never rides it.

Like me I reckon.

01-16-2013, 11:46 AM	#1533
andrewgore Team MGH Joined: May 2008 Location: NW Suburbs, IL Oddometer: 2,500	Sent out my cylinder to Paynes Cycle Center. They'll be sending it out to get bored & plated to match the readily available 280cc piston. Saves quite a bit of money & I get 8cc more out of the deal. Also ordering up all new Stainless Steel hardware for the bike. Far too much of the hardware on the bike was too dirty & messed up heads (looks like someone used SAE wrenches in Metric situations). Andrew __________________ Andrew Gore Three R Plastics Economy Cycle Stop Dropping your Helmet with Helmet-Hook I use Carbon Fiber Brake Rotors. Do you? Kettle Cycles

01-19-2013, 07:52 PM	#1535
andrewgore Team MGH Joined: May 2008 Location: NW Suburbs, IL Oddometer: 2,500	Cleaned every part on the bike today (ultrasonic cleaner is a godsend). Pressure washed the frame, swingarm, etc. Repacked all the linkage and swingarm bearings. Replaced wheel bearings front\rear. Wheels awaiting fresh tires this week. Removed a stuck rear caliper bolt (holds the pads in). Began reassembly of the bike. It'll just need the cylinder tossed in when it arrives. Working on replacing the fork seals as well. They are pretty well stuck in the aluminum housing. I was able to find a place online where I could score seals for 4$ a piece. I should be good for awhile. Andrew __________________ Andrew Gore Three R Plastics Economy Cycle Stop Dropping your Helmet with Helmet-Hook I use Carbon Fiber Brake Rotors. Do you? Kettle Cycles

01-20-2013, 09:40 AM	#1541
DrKayak Retro Rider Joined: Mar 2010 Location: Shingle Springs CA Oddometer: 536	Upgrade weekend for me Took a full year of searching to find this 2006 Rev3 for $2,500. Old and new ---- I got most of the service done on the new one. Trying to decide if I should leave the ATF in it. The clutch is actualy smoother on my Techno with Rotella 6T in the gear box. __________________ 06 950 Adventure 96 Beta Techno 07 450 EXC 04 FZ1

01-20-2013, 01:58 PM	#1542
joe cool Studly Adventurer Joined: Aug 2004 Location: southwest,ohio Oddometer: 753	Very nice looking Beta! I like to use Maxima mlt 75 w oil In my Beta. __________________ "One more day I find myself alive Tomorrow maybe go beneath the ground" Garcia/Hunter

01-24-2013, 06:29 AM	#1544
andrewgore Team MGH Joined: May 2008 Location: NW Suburbs, IL Oddometer: 2,500	Brakes cleaned and bled, new tires spooned on. Basically just waiting on piston\cylinder to come in, and we'll be back in action. The bike already feels 100x better than before. Andrew __________________ Andrew Gore Three R Plastics Economy Cycle Stop Dropping your Helmet with Helmet-Hook I use Carbon Fiber Brake Rotors. Do you? Kettle Cycles

01-17-2013, 06:00 PM	#1534
broncobowsher Gnarly Adventurer Joined: Apr 2010 Oddometer: 450	Went out for a pratice ride in the backyard after work today. First time since I got the CTI brace. Starting off the brace was VERY noticable, especially while trying to start the bike. Finally got the bike started. Started putzing around the yard, hard turns lock to lock weaving around trees, logs, assorted junk. Then over some of the stuff. A few things I quickly realized I forgot. How to ride, clutch control, riding smooth, how to do a simple hop and the knee brace. I really like that last one. I rode around for just a short time and went and put the bike away before it was too dark. Got off the bike and then remember I had the brace on. That was ! If I can forget that it is there in such a short time the first time I wore it then it must fit pretty good. Now to work on those skills that all went away over the past half year and knee surgery. I think by the time I get back up to speed the blown ACL and resulting surgery will be a year long speed bump. More peg time, watching the training DVD many more times, get the basics down again.

01-20-2013, 05:34 AM	#1536
2whlrcr gooligan Joined: Jan 2005 Location: Dubuque, Iowa Oddometer: 4,319	I rode for 15 minutes yesterday. It was 50F out. This morning it's -15F below wind chill.

01-24-2013, 08:49 AM	#1545
AteamNM Wonna Be ADVrider Joined: Mar 2010 Location: Sandia Mountains New Mexico Oddometer: 1,802	Those Betas are pretty. The blue one seems to continue to hold up years later. My neighbor Dean has the same Beta and never rides it. Like me I reckon. __________________ NMOHVA Member & NMTA Member The silence was absolute, the sense of peace profound, and it bled in to me from this beautiful land. (ROD CURRIE, Team Sibersky Extreme) Fly & Ride RR: http://advrider.com/forums/showthread.php?t=841561

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode