Go Back   ADVrider > Bikes > Some Assembly Required
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 01-21-2013, 10:40 AM   #11
dpetersak OP
Joined: Oct 2011
Location: Eagle River, Alaska
Oddometer: 44
I plan to use the existing handlebars, controls, speedo, etc. and mount to the KTM triple clamp. I cannot come up with any reason to change these if they will work. I have a minor problem with mounting the Harley brake line to the KTM caliper because they are two different style of bolts, but I have an idea on how to fix this. The stock riser puts the handlebar position is too high and too far back, but I need it because the speedo housing is the top bar clamp. So I cut off the bottom bulk, leaving me with 1.5" risers. Harley uses bolts from the bottom that go through the top triple clamp and thread into the base of the bar clamp, but the KTM bolts into the top triple clamp from the top, through the bar clamp, with the bolt head nested below the handlebar. I decided to use the KTM method.

dpetersak is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 12:03 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015