Go Back   ADVrider > Bikes > Thumpers
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 01-25-2013, 05:00 PM   #1
guns&coffee OP
guns&coffee's Avatar
Joined: May 2009
Location: Locust Dale, VA
Oddometer: 1,259
95 KTM 300 EXC Wiring

I'm putting lights on my recently acquired 95 300 EXC. Trying to get information on the wiring that went to the originl set-up. From what I would guess to be the rectifier under the tank, I have 3 plugs. The yellow wire comes off the rectifier into the harness. There's a single plug with a yellow wire, a single plug with a yellow wire and a white wire, and a double pronged plug with a brown wire and a yellow wire. Also there is a split off the harness that goes down by the kick-starter that has 2 plugs. I have no head-lightswitch at the moment. Does anyone know what should go where and to what? The oldest schem. from KTM is for 2005 EXC's. That also happens to be the year of my lights. Curious if these bikes has brake switches as well? I do know the brown wires are for grounding.
"Over the Mountains Of the Moon,
Down the Valley of the Shadow, Ride, boldly ride,"
The shade replied- "If you seek for Eldorado!" E.A.P. 1849
04 KTM 950ADV ~ "BEASTIE", '13 KTM 300XCW, '75 Husky 360WR/CR,

guns&coffee screwed with this post 01-25-2013 at 05:48 PM
guns&coffee is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 09:32 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015