ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 01-26-2013, 01:34 PM   #11
Beezer
Beastly Adventurer
 
Joined: Oct 2004
Location: Anchorage, formerly Spenard (hub of the universe)
Oddometer: 5,250
I would beat down that little lump that sticks up on the starter gear plate. then file the nicks a bit & check to see if it fits without rubbing (I think it will) then I would install it & go.

I would consider smoothing out the alu fin thing on the case if there is a crack in it (kinda looks like) but even a total removal should cause no harm

edit: if the bottom end is apart, I don't put it back together untill the top is on.... reason is that is you drop something in the hole up top, guess where it ends up. this can happen when checking valves for instance (how do I know this). thats the reason I Locktite the little dowel bushings into the head (the ones on the cam caps)

if the bottom is already assembled & the head is off you can let the chain fall in the hole while doing the work & pick it up with a magnet later... done this many times.

Beezer screwed with this post 01-26-2013 at 01:42 PM
Beezer is offline   Reply With Quote
 

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 04:21 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014