Airhead tech day at this guy's house - Page 5

blaine.hale · 01-25-2013, 06:29 AM

Quote:

Originally Posted by baldwithglasses

All right, my Airhead chunkulators -

I'm getting a new front end for my R65 from Brad, and maybe even a front wheel. I have a set of heads to install, so let's do this.

What are youse guys up to on Saturday, February 2nd?

I'm down to help but let's give a couple weeks notice for people to shift their schedules around.

atlthrux · 01-25-2013, 07:26 AM

I can do Feb 2... or later, too.
If you just need an extra hand, I'm happy to help. I've got a pretty flex schedule, esp during the week.

Quote:

Originally Posted by baldwithglasses

All right, my Airhead chunkulators -

I'm getting a new front end for my R65 from Brad, and maybe even a front wheel. I have a set of heads to install, so let's do this.

What are youse guys up to on Saturday, February 2nd?

hardwaregrrl · 01-25-2013, 08:56 AM

Quote:

Originally Posted by baldwithglasses

All right, my Airhead chunkulators -

I'm getting a new front end for my R65 from Brad, and maybe even a front wheel. I have a set of heads to install, so let's do this.

What are youse guys up to on Saturday, February 2nd?

Hey Len, I think I could spare a few hours next saturday.

One Less Harley · 01-25-2013, 09:09 AM

Hey I'm gonna be working on a 4 pot Brembo conversion for the R65 and R80ST which should fit..I hope. It's a few weeks out as I have a guy bringing me an ST to size up the conversion. The idea of this kind of fell in my lap, but I'm anxious to get this in the works. Should a simple switch once the machining is figured out. Details to follow...sometime.

Beater · 01-25-2013, 06:14 PM

Quote:

Originally Posted by hardwaregrrl

hey len, i think i could spare a few hours next saturday.

+1

sithndman · 01-25-2013, 07:09 PM

If I'm not working, I'm in!

baldwithglasses · 01-26-2013, 11:29 AM

It's short notice, so your presence isn't required. But come Saturday, you're welcome to join me to spin wrenches at my place from 11am - 5pm. I'll have coffee, a few brats or hot dogs, and a beverage or two.

IM me for my address

bgoodsoil · 01-27-2013, 03:01 PM

I'm in. Though I might be on a Honda :(

hardwaregrrl · 01-28-2013, 05:14 AM

Quote:

Originally Posted by bgoodsoil

i'm in. Though i might be on a honda :(

wtf?

blaine.hale · 01-28-2013, 06:20 AM

I should be able to make it for a few hours.

khale · 01-28-2013, 06:29 AM

I might be able to swing by as well. I'll get your address from Blaine if I can make it.

norton73 · 01-28-2013, 06:45 AM

Quote:

Originally Posted by One Less Harley

Hey I'm gonna be working on a 4 pot Brembo conversion for the R65 and R80ST which should fit..I hope. It's a few weeks out as I have a guy bringing me an ST to size up the conversion. The idea of this kind of fell in my lap, but I'm anxious to get this in the works. Should a simple switch once the machining is figured out. Details to follow...sometime.

When you do these conversions, do you need to change out the master cylinder?

01-25-2013, 09:09 AM	#64
One Less Harley OH.THAT'S GONNA HURT Joined: Nov 2006 Location: Bowling Green, Ky Oddometer: 3,814	Hey I'm gonna be working on a 4 pot Brembo conversion for the R65 and R80ST which should fit..I hope. It's a few weeks out as I have a guy bringing me an ST to size up the conversion. The idea of this kind of fell in my lap, but I'm anxious to get this in the works. Should a simple switch once the machining is figured out. Details to follow...sometime. __________________ 2004 BMW R1150RS 1984 BMW R80G/S (wrenching index) 2003 Suzuki DRZ 400S (TAT Prep) One More DRZ does the TAT (Ride Report)

01-25-2013, 07:09 PM	#66
sithndman Gnarly Adventurer Joined: Jan 2012 Location: Too far south of ATL Oddometer: 119	If I'm not working, I'm in! __________________ 1978 R80/7

01-26-2013, 11:29 AM	#67
baldwithglasses Godspeed, Robert Joined: Jul 2007 Location: East Atlanta Village, Atlanta, Georgia Oddometer: 789	Tech Day at THIS guy's house Feb. 2nd It's short notice, so your presence isn't required. But come Saturday, you're welcome to join me to spin wrenches at my place from 11am - 5pm. I'll have coffee, a few brats or hot dogs, and a beverage or two. IM me for my address __________________ My Big Trip Ghetto-Tek(tm) ammo box panniers

01-27-2013, 03:01 PM	#68
bgoodsoil Dare to be Stupid Joined: Jul 2008 Location: Atlanta, GA, USA Oddometer: 3,787	I'm in. Though I might be on a Honda :( __________________ '85 BMW r80G/S--Another G/S on the road--Central America on a Shoestring--Nova Scotia on a Shoestring Proud SmugMug User Support ADV: Don't give those cheap bums your discount code

01-28-2013, 06:20 AM	#70
blaine.hale ^OP Beastly Adventurer Joined: Feb 2009 Location: Atlanta, Ga Oddometer: 2,294	I should be able to make it for a few hours. __________________ 1974 BMW R90 /6 1968 Bultaco Matador MK3 1973 BMW R75 /5 Toaster LWB 1969 Bultaco Bandido MK2 2013 Husqvarna Terra TR650

01-28-2013, 06:29 AM	#71
khale ride dirty Joined: Oct 2009 Location: Atlanta, GA Oddometer: 420	I might be able to swing by as well. I'll get your address from Blaine if I can make it. __________________ 2013 BMW R1200 GSW \| 1973 BMW r75/5 toaster \| 2011 Husky TE310 "4 wheels move the body, 2 wheels move the soul"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode