Project Full Circle:Ninja 650 gets a makeover

sailah · 01-31-2013, 10:19 AM

Working on the rearsets. I have drawn up "The Gourd"

to have a sample made. I really need something in metal so I can attach the footpeg bracket and check the position. If anyone has any comments about the shape, lemme know and I'll see about trying to make it not so phallic shaped

I can also try some speedholes or cutouts. I think it would work well to attach the peg mounts with a DOM tube underneath but right now I want to get a sample made and make changes based on that.

I'm holding the peg and mount about where I want the peg. I think

. If you want to check where it would be on your bike, I screwed an M8 bolt into the lowest hole and my ankle bone was basically right on the head, and I drew in the pegs based on that.

I hate epoxy

01-31-2013, 10:19 AM	#11
sailah ^OP Lampin' it Joined: Aug 2005 Location: Turning expensive metal into scrap Oddometer: 4,137	Working on the rearsets. I have drawn up "The Gourd" to have a sample made. I really need something in metal so I can attach the footpeg bracket and check the position. If anyone has any comments about the shape, lemme know and I'll see about trying to make it not so phallic shaped I can also try some speedholes or cutouts. I think it would work well to attach the peg mounts with a DOM tube underneath but right now I want to get a sample made and make changes based on that. I'm holding the peg and mount about where I want the peg. I think. If you want to check where it would be on your bike, I screwed an M8 bolt into the lowest hole and my ankle bone was basically right on the head, and I drew in the pegs based on that. I hate epoxy __________________ We're not out here to rough it. We're here to smooth it . Things are rough enough in town. Nessmuk

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode