ADVrider

Go Back   ADVrider > Bikes > Some Assembly Required
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 02-04-2013, 09:18 PM   #14
dorkpunch OP
Oops...
 
dorkpunch's Avatar
 
Joined: Aug 2006
Location: Blackfoot, ID
Oddometer: 4,820
Little more progress on the tank. I'm not real happy with it, and I expect I'll probably scrap my first attempt but here you go anyways...

I built a set of "radius fingers" for the brake at school, this was kind of the maiden voyage. Turned out okay, but the fingers still need some work. To make a longish story short- here's the fingers.



Made them by splitting a 2" dia pipe in half, welded a cap on the pipe, made some new bar mounts, welded the bar mounts to the pipe halves, made an extra attachment for the folding blade, and there you go.

Works okay, but definitely not a perfect bend.





A little trimming and beating...



Sorta what it'll look like.



Like I said, first attempt. I'll probably screw up the corners where I have to trim the overlap on the bends. The flat part on the top will also be quite a bit shorter, and then angle down toward the back.
__________________
http://www.mobilemrt.com http://www.dorkpunch.com

"I've been going to this high school for SEVEN YEARS. I'm no dummy!"
-Charles De Mar.
dorkpunch is offline   Reply With Quote
 

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 02:40 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014