Center Stand for XR650L and XT225 - Page 31

WILL_S · 11-30-2012, 02:45 AM

Hi after a center stand for a te630
Cheers Will

RestlessRider · 11-30-2012, 07:13 AM

+1 for a 2012 KLX250.

Thanks,

Quote:

Originally Posted by Cigar Mike

If there is interest, why not?

Added to the list, which is growing everyday.

Cigar Mike

Cigar Mike · 12-03-2012, 08:23 AM

I am not making stands at this time. Weather is still to good here. No snow in Denver yet and temps in the 60s. I am also waiting to see what will happen with taxes and how that will affect my bottom line.

Agenda 21 is being pushed real hard by local governments and will have a big affect on our riding areas. We all need to be aware of UN Treaties ratified by the Senate. Many of the policies are being installed at City and County levels. It is done a small piece at a time. If you are not familiar with Agenda 21 go to the UN website and check it out.

Mike

stnick · 02-15-2013, 06:46 PM

Any idea on the XR650L stand?
256-651-9715 Nick

Cigar Mike · 02-15-2013, 08:13 PM

I have'nt decided yet if I will be making stands or not. I have been busy with other things that I need to do and have not had time. It takes me about 10 hours to make a XR650L stand. I just don't have that much time to make them right now.

Mike

stnick · 02-16-2013, 05:11 PM

Ok Mike thanks for the reply. All my KLR riding buddies will hopefully be around when I have another rear flat in the middle of the Smokey Mountains... they dish out verbal abuse and I give it right back in the form of a rooster tail from the XRL. lol
Do you know of anyone that might have one of your stands for sale? At 56 and still riding strong, I like to do all I can to be prepared before the ride.

Thanks Mike,

Nick Nichols

KilgoreTrout · 02-16-2013, 05:52 PM

Keeping my fingers and toes crossed you decide to keep building and perfect the Transalp stand. Cheers from the snowy north country

Northern Hooligan · 02-19-2013, 10:17 AM

I am interested in a XR650l stand as well. It would be sent to OR to save any paperwork for the border.

Cheers

Cigar Mike · 02-22-2013, 08:54 AM

Quote:

Originally Posted by Northern Hooligan

I am interested in a XR650l stand as well. It would be sent to OR to save any paperwork for the border.

Cheers

I will make a very small number of stands this year. I started doing this so I would not be sitting around in the meathead chair. Now it is hard to find time to make them at all. I will give priority to ADV inmates on what I do make.

stnick · 02-22-2013, 09:04 PM

Hey Mike, is there a list of names with approximate time of delivery? I know you said it's a hobby making these stands but I just want a good guess when santa's coming.
Thanks, Nick

Nicholas Chan · 02-24-2013, 09:08 AM

Hello Mike,

Glad to hear that you are getting back into business! How can I make an order for an NX650 stand?

Quote:

Originally Posted by Cigar Mike

I will make a very small number of stands this year. I started doing this so I would not be sitting around in the meathead chair. Now it is hard to find time to make them at all. I will give priority to ADV inmates on what I do make.

Cigar Mike · 02-24-2013, 05:32 PM

The list is long right now. We received a good amount of snow today and will get more this week. It looks like I will start making some stands tomorrow after I am done shoveling. I can not give a date on when requests will be filled. Sorry.

Mike

therealbigman · 02-24-2013, 05:45 PM

After consulting with Mike ,

He has givin me the go ahead to post my Centerstand for an XR650L for sale here ,

That will help him reduce his list by 1 .

It is Brand Spanking New, never even bolted on ,

If anyone is Interested , PM me and we can work out the details .

Cigar Mike · 02-25-2013, 06:22 PM

Quote:

Originally Posted by therealbigman

After consulting with Mike ,

He has givin me the go ahead to post my Centerstand for an XR650L for sale here ,

That will help him reduce his list by 1 .

It is Brand Spanking New, never even bolted on ,

If anyone is Interested , PM me and we can work out the details .

It will be nice for it to go to another inmate

Lonestar2112 · 02-25-2013, 06:30 PM

Quote:

Originally Posted by therealbigman

After consulting with Mike ,

He has givin me the go ahead to post my Centerstand for an XR650L for sale here ,

That will help him reduce his list by 1 .

It is Brand Spanking New, never even bolted on ,

If anyone is Interested , PM me and we can work out the details .

+1, I too talked to Mike. If you guys need one PM me. Never been installed.

I am selling mine because I am getting out of dirt riding on my bikes. I am going to focus on mostly street rides for the for see able future.

11-30-2012, 02:45 AM	#451
WILL_S 110 POWER Joined: Feb 2009 Location: goodly satisfactory place, qld Oddometer: 1,642	Te630 Hi after a center stand for a te630 Cheers Will __________________ Take the green pill or the red pill- the choice is yours;This is your last chance. After this, there is no turning back. You take the blue pill - the story ends, you wake up in your bed and believe whatever you want to believe. You take the red pill - you stay in Wonderland and I show you how deep the rabbit-hole goes.

12-03-2012, 08:23 AM	#453
Cigar Mike ^OP Too Old and Too Slow Joined: Jan 2007 Location: Centennial, Co Oddometer: 1,126	Not Working I am not making stands at this time. Weather is still to good here. No snow in Denver yet and temps in the 60s. I am also waiting to see what will happen with taxes and how that will affect my bottom line. Agenda 21 is being pushed real hard by local governments and will have a big affect on our riding areas. We all need to be aware of UN Treaties ratified by the Senate. Many of the policies are being installed at City and County levels. It is done a small piece at a time. If you are not familiar with Agenda 21 go to the UN website and check it out. Mike __________________ When in doubt, give it Gas! Center Stands, XR650L/XR600, NX650, TE/SM610, TE630, XR400, XR250 and XT225. http://www.advrider.com/forums/showthread.php?t=537336 http://www.cigarmikes.com/

02-15-2013, 06:46 PM	#454
stnick n00b Joined: Nov 2006 Oddometer: 9	XR650L Center stand Any idea on the XR650L stand? 256-651-9715 Nick

02-15-2013, 08:13 PM	#455
Cigar Mike ^OP Too Old and Too Slow Joined: Jan 2007 Location: Centennial, Co Oddometer: 1,126	I have'nt decided yet if I will be making stands or not. I have been busy with other things that I need to do and have not had time. It takes me about 10 hours to make a XR650L stand. I just don't have that much time to make them right now. Mike __________________ When in doubt, give it Gas! Center Stands, XR650L/XR600, NX650, TE/SM610, TE630, XR400, XR250 and XT225. http://www.advrider.com/forums/showthread.php?t=537336 http://www.cigarmikes.com/

02-16-2013, 05:11 PM	#456
stnick n00b Joined: Nov 2006 Oddometer: 9	XR650L center stand Ok Mike thanks for the reply. All my KLR riding buddies will hopefully be around when I have another rear flat in the middle of the Smokey Mountains... they dish out verbal abuse and I give it right back in the form of a rooster tail from the XRL. lol Do you know of anyone that might have one of your stands for sale? At 56 and still riding strong, I like to do all I can to be prepared before the ride. Thanks Mike, Nick Nichols

02-16-2013, 05:52 PM	#457
KilgoreTrout adventure flyfisher Joined: Mar 2009 Location: Alberta Rockies Oddometer: 327	Transalp Keeping my fingers and toes crossed you decide to keep building and perfect the Transalp stand. Cheers from the snowy north country __________________ 96 DR 650 77 Montesa Cota 247 Restored 87 XL600V Transalp Project 77 Yamaha TY 250 Restored 75 Honda CT 90 Trail Project

02-19-2013, 10:17 AM	#458
Northern Hooligan Adventurer Joined: Jan 2013 Location: Edmonton, AB Canada Oddometer: 21	I am interested in a XR650l stand as well. It would be sent to OR to save any paperwork for the border. Cheers

02-22-2013, 09:04 PM	#460
stnick n00b Joined: Nov 2006 Oddometer: 9	Center stand Hey Mike, is there a list of names with approximate time of delivery? I know you said it's a hobby making these stands but I just want a good guess when santa's coming. Thanks, Nick

02-24-2013, 05:32 PM	#462
Cigar Mike ^OP Too Old and Too Slow Joined: Jan 2007 Location: Centennial, Co Oddometer: 1,126	The list is long right now. We received a good amount of snow today and will get more this week. It looks like I will start making some stands tomorrow after I am done shoveling. I can not give a date on when requests will be filled. Sorry. Mike __________________ When in doubt, give it Gas! Center Stands, XR650L/XR600, NX650, TE/SM610, TE630, XR400, XR250 and XT225. http://www.advrider.com/forums/showthread.php?t=537336 http://www.cigarmikes.com/

02-24-2013, 05:45 PM	#463
therealbigman bout a dollar 3.98 Joined: Jul 2010 Location: Texas Gulf Coast Oddometer: 3,067	After consulting with Mike , He has givin me the go ahead to post my Centerstand for an XR650L for sale here , That will help him reduce his list by 1 . It is Brand Spanking New, never even bolted on , If anyone is Interested , PM me and we can work out the details . __________________ Marko 08 xr650l 99 xr650l 84atc200s 85atc200s 80ct110 99xr70 04xr50 85atc70 87trx70 Dumb ass people do dumb ass things

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode