|06-16-2013, 11:46 PM||#1|
Joined: Apr 2005
Location: Beween here (SE Asia) and there (NH/VT)
Clutch cable: to lube or not to lube?
Just had a seized cable as a result of corrosion. Only 6 months on the bike.
It could have been a sea crossing where the whole bike was liberally doused by the waves, or standing in the rain, or it could have been slightly corroded from delivery, as the clutch and shift action after replacement is much better than it's ever been.
I have a lube tool, another question is whether to use the supplied cable lube or a really good corrosion inhibitor I have (ACF-50).
No WD40 thanks, I've proved that the ACF-50 works a lot better already.
Sent from my Android chinaphone, please excuse the spelling
'11 Yamaha YBR125G (cheap and very cheerful
'12 Zongshen Fly / Motorstar MSX200-II (biggest-fun-to-dollar ratio of any bike I've owned)
'03 Honda VFR800 (sold)
'06 Husky TE610 (gone)
tshelver screwed with this post 06-16-2013 at 11:55 PM
|Thread Tools||Search this Thread|