Okay folks here is what we have decided to do at Freedom Sidecars L.L.C. in light of this thread. First off I do not feel that there is any real issues with the trail reducers as they are. I think the issue described herein was due to a trail reducer loosening up and not being detected. Regardless of that it became an issue that potentially could have created much more serious ramifications than we have seen described.
Let me say this: We have had outfits we have built do Trips to Alaska, Labrador, Terra Del Fuego and Africa with no issues related to the trail reducer at all. Our policy has always been to observe what could be potential shortcoming and go the extra mile to make things better even if it may not required. Again, I am in no way stating that our or anyone else's trail reducer is defective of under par in design but only saying lets go a step farther. Frankly I need to sleep at night and we want peace of mind in the same fashion from those who purchase from us at Freedom Sidecars (C Stanley Motorsports) which is much more important that any stupid profit and loss statement. If you are worried at all that does not let me feel good either...so...
Our trail reducers moving forward will have a steel threaded sleeve inserted into them from the bottom up which will be threaded to receive the ball joint. The shape will be kind of like a top hat turned upside down and the brim of the hat will be bolted to the bottom of the trail reducer to prevent any turning. So, steel ball joint threads will be run into a secured steel threaded sleeve. If anyone who presently has one of our trail reducers wishes to have it retrofitted in this fashion that can be done. Give me a call if you want to do that. This will be done at no charge except shipping and handling. If we do it here we will charge labor however.
Again we feel strongly that this is an overkill improvement on an already good design and are offering it as a standard on all new trail reducers for the 1150 and 1200 GS models and as an act of good will are open to retro fitting the old ones if anyone desires we do so.
No pictures yet but I think all will get the idea.
By the way we are in the middle of doing a leading link which will eliminate the telelever all together and provide a means to run the same tire and wheel combo all around on the 1200 models. On the 1150 models a Stroker wheel on the rear would be required but the sidecar and front wheel can be the same still with all matching tires if desired.
Please take this in the right context. I am not casting blame on any of our or anyone else's product we are only making an attempt to up the bar a little for the good of all who may have concerns even though they are, IMHO unfounded.
JOIN US ON FACEBOOK....FREEDOM SIDECARS
Founder: Internet Sidecar Owners Klub at SCT
President: C Stanley Motorsports Inc.