|02-07-2007, 03:47 AM||#1|
Joined: Jun 2006
Location: Sweetwater, TN
tracks/waypoints to Delorme (confused)
My wife bought me Delrome 6.0 topo for Christmas and I havent done much with it yet, doesn't seem very easy to figure out.. It appears delrome only loads .tpx files? I'd like to bring in some of my tracks/waypoints onto the screen, but I can't find any options in gpsbabel for converting to .tpx , any ohter help would greatly be appreciated also..
Also I opned up sweetwater, tn and it doesnt have a built in map for this area, and to scan east, there was only one little block that had coverage, is the whole united states not included in the delorme topo package, or is it just certain areas (natioanl parks,etc)???
Python423 screwed with this post 02-07-2007 at 03:59 AM
|02-07-2007, 04:33 AM||#2|
Joined: Jun 2006
I am sure others will be of more help, but I'll take a crack......(and I would not call Delorme's intuitive )
I believe Delorme sells both a full US and a 1/2 US version, I thought the division is the Missisippi Rvr.
Onion screwed with this post 02-07-2007 at 04:43 AM
|02-07-2007, 06:48 AM||#3|
Joined: Aug 2004
Location: Central NM
To go from Mapsource to Top USA, you do the following (at least this works for tracks I have not tried this with routes):
Save your Mapsource file as a .gpx file. Then in Delorme from the draw layer tab use the import function to bring in the gpx file.
I have done this thousands of times and works like a charm.
To go the other direction from Delorme to Mapsource is a little more difficult but is doable with some share ware.
|02-07-2007, 10:10 AM||#4|
Joined: Oct 2003
Location: Odessa TX USA
You can import "gpx" files ( click the "DRAW tab" then "FILE" then "IMPORT" select "gpx"
or you can import directly from a gps , To Receive a Track
Use the following steps to receive a track from your GPS device and save it as a track.
Connect your GPS receiver to your computer.
If you are using a third-party GPS receiver, you may have to use specific settings. For example, if you are using a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For more information, see your owner manual or GPS Settings for Third-Party Devices.
Click the Exchange button in the toolbar. (It is the little ICON that looks like a monitor with two yellow arrows)
Under Device Type, select GPS.
Select Receive from Device.
Select Track from the Object drop-down list.
Select User Map Data - Track from the Save As drop-down list.
Select the track name or track number on the device that you want to receive.
Note: Not all devices support downloading individual track logs. See your device manual for more information.
Select the track file you want to add the track information to. If you want to create a new track file, select New from the Track File drop-down list and type the new track file name in the New Track File text box.
Optional: Type a label for your track in the Track Label text box.
Click Receive from Device.
Repeat steps 9–12 for every track file you want to receive from your device.
The above is from the help file.
I hope this helps
I use it all the time, the more you use the Delorme software the more you find out what it will do, It just take awhile to get used to it,
It is all I use for route planing now, and I have had some great GS dualsport rides thanks to it.
"Do not go where the path may lead, go instead where there is no path and leave a trail. ~ RWE
|06-04-2012, 08:02 PM||#5|
Joined: Oct 2010
Location: Boulder, CO
export from delorme?
To dig up an old thread.....
I have some old tracks that I want to pull into MapSource. Unfortunately they were created in Delorme 2.0 which creates .TP2 files. It's not one of the choices in GPSbabel. Any ideas welcome.
'03 KTM 450EXC
"If you know what you are doing, you aren't learning anything." A. Lincoln
|06-05-2012, 01:46 AM||#6|
Joined: Jan 2006
dlh62c screwed with this post 06-05-2012 at 02:03 AM
|06-07-2012, 08:28 AM||#7|
Joined: Dec 2007
Location: Abq NM
+1 just export your stuff from Delorme as a gpx file and Mapsource will read it just fine.
I used to do it all the time because I used Delorme to create tracks from Mapsource routes. But now I use WinGDB3 or Basecamp to do the conversion.
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|