The KnL footpegs use the oem springs and pivot pins, they will fold up like the stock pegs, pretty much at a 45 degree angle. Last I knew there was no standard height option but you might want to verify that as I was specifically looking for lowered and could have missed other choices. Bruce
I don't believe the "bottom" of the peg is any lower. Its just that the height of the peg is shorter from bottom to top than the OEM pegs, so they have a lowering effect. I picked them up as well and they are nice. Now, to get some spacers for the right foot bracket to rid myself of elvis legs.
No technical talk to contribute. Just hate to see the lights out on the Scrambler thread when I check in. Here's a nicely done Scram sent to me by my buddy Henry (Henry II here):
Anyone got good ideas for skid plate bolts? The cheesy hex jobbers that came stock always seize and round out as you're trying to remove the danged thing. No amount of anti-seize stops them from corroding in place. I'm going to say screw it and put in regular headed bolts and call it a day, unless other folks have better ideas. Usually anti-seize or blue Loctite works but both have failed for this application.
Got out for some back road riding with a buddy today. He borrowed my '08 Scrambler for a while last year while trying to decide what to buy, ended up with a pretty white over red '06. When we stopped for some lunch it was very apparent that his bike seemed to stand up 'normal' on the side stand while mine (and the other Scramblers that I am familiar with) leans rather drastically. I had always attributed this to Triumph using the same stand as on the Bonny, despite the longer Scrambler shocks, now I am wondering about that. So ... Scrambler owners who still have stock length shocks, does your bike lean drastacally on the side stand? Bruce
Yep, mine has the lean. I noticed a couple months ago it was getting worse and found the kickstand bolt had loosened up and was about to fall out. Thats when I decided to check all the bolts on my bike and found that the front sprocket was also loose as well. .
Thanks, I haven't noticed that mine was getting worse but I miss a lot more than I used to so I better check that bolt! Bruce
Did 1000km of dirt riding 2 weeks ago on the annual "Parys-De Aar Rally" in South Africa. What a blast! Hope you don't mind me sharing a few pics.
That's shocking! How could they overlook the total difference in exhaust beat between the Scram's 270° crank and the Bonnie's 360° crank!? To me the soundtrack provided by the Scrambler when ridden is one of the (many) great aspects of the riding experience (TOR's on mine). A Bonnie, even with TOR's, would be a totally different soundtrack, so a totally different riding experience. Vive the difference! Those dealers really ought to have better awareness!! While mentioning the crank... Although it is described as a 270° crank, when I was looking at the cylinder firing order, the crank throws and the camshafts shown in the assembly diagrams and relating what I saw there to what I was hearing and feeling as exhaust pulses at the tails of the exhausts, I figured that the two power pulses are 90° apart and that the valve timings give a little overlap of the two exhaust pulses - Cyl1 Ex still closing as Cyl2 Ex starts to open. Anyone else that's given this some thought - do y'all agree? Disagree? 'Cuz it puzzles me why they call it a 270° crank if the power strokes are 90° apart. Your thoughts please.