Rock Hard Rally Gear. KTM LC4 and LC8 rally bash plates. (Australia)

Hi all
here are some pics of my bash plates I have been making for the 640 ADV

And more

Styley...Any clues on how I can get one of these to my dooorstep in Newfoundland? (that's on the east coast of Canada) I'm waiting for the rocks around here to tear off my petcock on one of my getoffs.

Hi skybum69

I have made some and have a few, more in the pipe line waiting to finish.
The boxes seam to be water tight and protect the tank ,if you lay the bike on its side the tank doesn't touch the ground. I am asking $650 Oz $$ + P&H .
If you want I can check the P&H if you are interested.Just PM your details.
Cheers
Matt

I wonder what it would cost to get one of these shipped to the USA? My 640 is begging for one of these!

Hi guys have sold some hear in OZ and have a few guys the in states interested in them . They cost $650.00 +P&H OZ $ and I think that is about $650 + P&H to the states . I can get exact pricing if needed. Check the OZ site as there is more info there .

The main plate is 5mm 5083 alloy the boxes 3mm 5005 alloy the lids 5mm and seam to be water and dust tight .It offers grate protection for the petcock and when the bike is on its side it rests on the bash plate and handle bars. Weight is about 4.5kg .If any one is interested send me a PM

Cheers

Matt

That is a nice offer Matt. I believe the saying is they look to be the Dog's Bullocks.

Matt,
You are a vendor and this is where such posts belong. Please don't post this sort of thing in the general forums anymore. Thanks!

If you mean there good then that is "the ducks guts" its an aussy thing

I don't know about the "skybum" thing, I'm really not that tall. It's a good looking piece and comes in at $478 CAN before shipping. I'm not sure my budget can handle that at the moment. I'll keep it in mind though.

and more

Changed the left side box of more clearance and better vision of the sight glass.

Hi Billy B.F

then finished bash plate weighs about 4.85 kg with good vision of the sight glass.

Pm'd you about getting a couple of them mate, they look great.

Thanks Matt! I mounted the new bash-plate and it is a welcome addition to the 640. Fits great! Now I need to get out and give it the torture test!

I would be very interested to see how the front mount holds up. Weighing just under 5kg mt then adding tools,oil,etc could put a bit of stress on it. If the mount proves to hold up then i would be fairly keen!!!!

I have put my one through hell and back and I doubt to many would go where mine has gone. I launched mine off a jump at about 80km fully loaded with panniers and lander on a rock , it hit under the right side box and just put a bit of a dent in the plate, thats about 340 kg bike rider and gear.
I hit a tree stump at about 60km in the rain on a single track . It hit the left side box and only just marked it but it saved my foot. I have had it wedged in ruts plenty of times and jammed between rocks with the only thing to go wrong is I have bent a couple of the bolts on the bottom.
All the mounts seem to hold up well.
Cheers

Matt

I have made a of sets of racks for a couple of the guys.
They fit the 640 and are made to fit my Andy straps soft panniers.
A bit of paint and there ready to go.

Thanks Matt, Sure sounds like you have done some serious field testing. Once me kicker shaft seal has been replaced(bummer) i will think about ordering one.

Top stuff, Bicks