R1200 Front Axle Tool and Spark Plug Cap Tool Combination

This is a tool that will make more room in your tool kit. The hex tool is made out of 7075-T6, aircraft grade aluminum for the front wheel and the black anodized part is a spark plug cap removal tool. The hex tool will also fit the the plastic oil cap. These tools fit together with an o-ring around the hex tool, to give it a friction fit inside of the spark plug tool. It's 1.5" long and 1.25" in diameter, and only weighs 1.8 ounces. The hex tool has been tested to 100 ft. lbs of torque, with no distortion. This is over twice the amount of torque needed for the GS/RT wheel.

Made in Montana

Our tools will fit all of the R1200 series, including the new Wet Heads and the new 1250's!

You can also buy the Spark Plug tool and the Hex tool separately.

The Hex Tool will also fit a number of other bikes that require a 19 or 22MM hex.

For more information please visit our website @: www.promachdualtool.com
Don't forget to "Like" our Facebook Page: https://www.facebook.com/PromachDualTool
Also check out our YouTube video @ http://www.youtube.com/watch?v=g7TatOp_37U


For those of you/us, that don't like filling in an account page to buy a product. If you want to pay with "Paypal", you can email want you want and make the payment to our "Paypal" account, @ dualtool@centurytel.net . Make sure you let us know what your ordering and your mailing address.
We can only except credit cards through the website.

I have one of these & have to say it's pretty damn cool.

--chiba

Saw Chiba's Dual tool at a local club Tech Day and thought it was a pretty ingenious piece of kit. I have separate tools that do the job(s) of the Dual Tool just fine, but are not nearly as compact and travel friendly. They will stay on the shop shelf and the Dual Tool will be a welcome addition to my tool roll.

Paypal sent.

Thanks

We have sold this tool to several people that wanted something more compact and lighter than what they had.
We appreciate all feedback.
Ride Safely
Promach 1

Bump?

Sent from my DROIDX using Tapatalk

just ordered one...

Do you ship to the UK?

Simon

Thank you for your order. It looks like the season is picking up and the orders are starting to come in. Thank you to all the others that have given us the high marks.
Ride Safely
Promach 1

My wife just gave me both tools for my birthday. Very well made! Tried the spark plug tool and it worked great. I haven't actually used the wheel tool, but the fit into the hex was really nice and it looks pretty sharp.

Thanks!
DAVE

Thank you for your feedback and thank your wife too! They have been selling like hot cakes and no complaints. Have a really good and safe riding season.

So far, we ship just about anywhere.

just placed an order. Do you know if the spark plug removal tool will work on an 1150 also by chance? Thanks!

Sorry about that. I didn't know, and it won't happen again.

I don't know if it will or not. Please let me know if you find out.
Thank you for your order.

It will not work on the front axle of R1100 or R1150 generation bikes. You need a box-end wrench or a socket (17mm IIRC but it could be bigger) for that.

--chiba

I'll try it to see. I know the wheel tool won't work because the 1150rt doesn't need a special tool. I am hoping that the spark plug removal will work for both. I'll give it a shot and post back what I find out. Thanks.

Just received the tool today. Nice workmanship, almost hate to use it, its like a jewel. The lady at the post office actually wanted to touch it , not my tool your tool! Truly a thing of beauty, thanks.

Paul

Just ordered one so I can get my wheel off! Need a new tire and I don't want to pay someone to do something I can do. Plug cap tool is a bonus.

Make it happen Promach! Thx.

Ordered a few days ago. No problems.