Hello Everyone, My search-foo is weak to say the least, but I did try to no avail. Does anyone know of a complete kit for a high fender? Thanks for any help!
Im not aware of a "complete" kit but I will throw ya a bone here and tell you what I found and have done to mine. Acerbis Super moto fender....its cheaper than the OEM EXC fender and looks nicer IMHO. Will bolt directly to the under side of the triple, but you may need spacers to angle it properly. KTM 85SX fork guards....Again, I think Acerbis makes these. They sould bolt almost 100% direct to the forks. You may need to mod it a bit, but not much. And last but certainly not least, Brake line hose guide. You'll need 2 plus the rubber grommets. Part numbers from KTM Twins for above guides, grommets and fork guards: 60013025050 - RUBBER FOR BRAKE HOSE GUIDE03 - QTY 2 60013025100 - FRONT BRAKE HOSE GUIDE - QTY 2 5900109400030 - FORK PROTECT. L/S R/S BLACK02 -QTY 1 (BLACK SX85 Fork guards) EDIT: Dont waste your time or money on the EXC fork guards....they are a PITA to mount and are a bit too high for the standard 990adv fork.....mine kept bottoming out on the fender in the rough stuff and rubbed my fork tub real good. 85SX ones are WAAAAY better.
I did! (dad-gum Dillon!!..) Another 2007 with 18.5k on it. Orange of course. I missed Flash so much, I had to have another one. Thanks for the help! Thanks Jbone!
Not sure if this helps or not. I just put a kit on my 990R and I had purchased the kit from KTM Twins. I think it all was 90 bucks plus shipping. Super cheap in my opinion. Like the previous inventive way of making a bracket for the lower stanchion. It comes with the fender, 2 fork guards and 2 metal brake cable holders. Pretty much bolts up except for the fork guards. Plenty of pages with different interpretations of brackets to hold them in place. Cheers Brandon
Aw Dude...you gots the VooDoo fairing for your 990! So Sick....I've been after one since Britania Comp had it up for sale. Looks soooo nice!
Hi Ya Goat and Spencergt I still have the 690, and it is a great bike. I just missed Flash so much I had to buy his long lost brother, Blaze!! It was such a good deal, I just couldn't pass it up. I also still have the mighty 'Berg. Man, I gots to be gettin' some time to ride!
Mongo no-how to post pictures..I only been here 7 years, cut me some slack, i'll text you a picture to post fer me mmk?? Dope.. I lost your number, I asked Goat to post it if he would?
Hi there, You may want to have a look here: http://advrider.com/forums/showpost.php?p=24391422&postcount=4 and maybe here: http://advrider.com/forums/showthread.php?t=986114 I have made a couple of brackets. In case you are interested, they would cost 25euros a pair, postage included. They suit only 990Adv. Cheers.
Did I read your thread correctly ? - you have some brackets for the 990 to fit the fork guards suitable for a high fender ? If that is the case Id be interested in buying them off you. Do you have a picture and which fork guards are they suitable for ? Thanks.
Here is the parts list for when I did mine. Turned out great. Of course, had to make a bracket for the fork guards. I've had no issues with using the EXC guards. One thing you might want to add is the round plastic guide that will replace the wire version that comes on the 990. It snaps into the same groove. Same part is on all of the KTM dirt bikes. It will prevent rubbing of the guard on the upper fork tubes. KTM FRONT BRAKE HOSE GUIDE 60013025100 KTM RUBBER FOR BRAKE HOSE GUIDE 60013025050 KTM SPACER BUSHING 54808020000 KTM HH COLLAR SCREW M 6X20 0014060203 KTM SPECIAL SCREW M6X12,5 59001092050 KTM FORK PROTECT. L/S+R/S WHITE 7800109420028 KTM FRONT FENDER WHITE 7730821000028 http://www.ktmpartshouse.com ben
