AR-NWA ADV BS thread

Doc must be sleeping in. So good MORNING.

Lazy bum.

I think I might have seen a couple of snow flakes on the way in this morning. :huh
Mornin'

what time do you roll to work Dravinkermit?

Kind of forgot how cool it can be on the neck for the ride in. I will have to remember to put something on for that.

One good thing about the cold weather, my bike doesnt ping with cheap gas...

Spanky's wife does too....Mine is still working on the courage to ride with me

yep..have had a couple of restless nites..I still do not feel rested yet

mornin anyway

Someone on here own these beasts? They are so very cool. If only I didn't have too many bikes already.

http://fayar.craigslist.org/mcy/3675713118.html

Doc you ever try that ambian? It helps you sleep? I used them after i would get cut on to help get sleep. I have never slept so good.

stuck

This morning I left the house at about 6:30

Lol. Do you find yourself doing the turtle? You know, squishing your head down into your coat.

You have the good gas station between your house and work, so you really have no excuse.

Matt's entirely too thrifty for that.

You're right. he probably has a system to separate the ethanol from the petro.

Anybody know how the pins inside OEM plugs come out? I know Travis had/has a tool to remove and install them. Can it be done without that tool?

I went to test drive the DRZ after finishing the rewiring my tank bag. All was including my heated clothing working (yay). Good until I turned the bars right. When I do that the bike shuts off. I traced it to a single pin in the ignition switch wiring. I tried to tighten it by bending the female side of the plug with a small standard screwdriver but it didn't work. I need to pull that brass bit out and check it/straighten it/tighten it.

And no, I can't just turn to the left to avoid the problem.

He prolly drinks the ethanol to save money on beer.

is it bad that I advance my timing in the winter, and retard it in the summer so I can run cheaper gas?

You answered your own question.

Dammit Charlie coffee on KB and screen

Had the pleasure of replacing the rocker gaskets on the wifeys Harley this morning. Now I just need the time to work on mine!